20AD8P0A3AYYNNC0

The Allen-Bradley 20AD8P0A3AYYNNC0 frequency drive operates with a 3-phase (6-pulse) voltage of 480 Volts AC and a frequency of 50 Hertz. It has the ability to control motor speed and torque by modifying the motor’s frequency and input voltage. The Allen-Bradley 20AD8P0A3AYYNNC0 frequency drive has been included in the Powerflex 70 product line, specifically in the Frame B series. This drive has an amperage rating of 8.0 Amps and 5.0 Horsepower. The Allen-Bradley 20AD8P0A3AYYNNC0 frequency drive has an LCD as a human-machine interface. There is a wide range of variables that can be controlled through this display. Some of the parameters that are included in the programming are the motor control, monitor, speed command, dynamic control, utility, communication, and an input and output section.

The Allen-Bradley 20AD8P0A3AYYNNC0 frequency drive has an open enclosure. This enclosure protects the essential connections of the drive and at the same time helps it to have better ventilation. The maximum temperature allowed with this enclosure is 50 degrees Celsius. Since this drive is not fully protected, it should not be exposed to liquids or corrosive environments. When installing the Allen-Bradley 20AD8P0A3AYYNNC0 frequency drive, minimum clearances of 76 millimeters must be left around it in order to let the air flow properly and the drive must be included in a ground system in order to avoid electromagnetic interference. This will greatly improve the performance of the drive. The Allen-Bradley 20AD8P0A3AYYNNC0 frequency drive has a width of 171.7 millimeters, a height of 234.6 millimeters, and a depth of 94.2 millimeters.