Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AD8P0A5AYNNRC0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AD8P0A5AYNNRC0

|
Need a Specific Revision?

The 20AD8P0A5AYNNRC0 belongs to Allen Bradley's PowerFlex 70 series. This variable speed AC motor controller operates with enhanced vector control in sensorless mode. Designed for three-phase systems, it works on a 480 V AC input and provides reliable operation in various applications.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AD8P0A5AYNNRC0

ManufacturerAllen Bradley
Product TypeVariable Speed AC Motor Controller
Product LinePowerFlex 70
Part Number20AD8P0A5AYNNRC0
Weight12.00 lbs (5.44 kg)
Control ModeEnhanced Vector Control (Sensorless Operation)
Feedback OptionOpen-Loop Control (No Encoder/Feedback Card)
Physical Frame SizeFrame B Compact Design
Communication InterfaceRemote I/O via Digital Peripheral Interface (DPI) Module
Input Voltage480 V AC, Three-Phase Supply
Input Configuration3-phase, 6-pulse Input (50 Hz Compatible)
Normal Duty Rating8.0 A / 5.0 HP / 3.7 kW Output Capacity
Heavy Duty Rating3.0 HP Continuous Output (High-Torque Applications)
Enclosure RatingPanel Mount, IP20 / NEMA Type 1 Protection
Display InterfaceIntegrated LCD for Parameter Monitoring
Configuration MethodProgramming-Only Interface (No Preloaded Profiles)
Brake SystemIntegrated IGBT Dynamic Braking Module
Brake Resistor CompatibilityExternal Resistor Required (Not Included)
Compliance FeaturesLacks CE-Certified EMC/RFI Filter
Request a Repair

The 20AD8P0A5AYNNRC0 from Allen Bradley is a variable speed AC motor controller designed specifically for use in three-phase applications. This device operates on 480 V AC input and is suitable for installation in a compact Frame B design. Its enhanced vector control mode allows for sensorless operation, optimizing performance without encoders or feedback cards.

Regarding power ratings, the controller has a normal-duty output capacity of 8.0 A, equating to approximately 5.0 horsepower (3.7 kW). For high-torque applications, it can deliver a continuous output of up to 3.0 HP in heavy-duty conditions. The integrated display interface is an LCD, allowing users to monitor parameters effectively during operation.

Communications are achieved through a remote I/O setup via a Digital Peripheral Interface (DPI) module, enhancing connectivity with other system components. However, it should be noted that the configuration method exclusively relies on programming input, as there are no preloaded profiles. While the included brake system comprises an IGBT dynamic braking module, it requires an external brake resistor that is not included with the unit.

This PowerFlex 70 drive's enclosure is rated at IP20 / NEMA Type 1, indicating it is suitable for panel mounting in environments with minimal dust and water exposure. Additionally, this controller lacks a CE-certified EMC/RFI filter, making it essential to consider compliance requirements in specific installations.