Product image is representative; revision or series may vary. Contact us to request a specific version.
This AB AC drive comes with a rating of 8 Amp. This PowerFlex 70 comes with a kW rating of 3.7 kW. Additionally, it is a 5 HP rated drive. It comes with a LCD and numeric keypad inferface module installed on the faceplate. This AC drive has a B frame size, has an IP66, and has power requirements of 480 VAC (50 Hz).
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
Repairs and exchanges are available for all automation products.
Drop shipping, blind shipping, and account shipping with no extra fees.
| Manufacturer | Allen Bradley |
|---|---|
| Category | Drives |
| Product Line | PowerFlex 70 |
| Part Number | 20AD8P0C3AYNANC0 |
| UPC | 820919379086 |
| Weight | 9.75 lbs (4.42 kg) |
| Voltage | 480V AC |
| Ph | 3 |
| Amps | 8 |
| kW(Hp) | 3.7 (5.0) |
| Frame | B |
| Enclosure | Wall/Machine Mount = IP66, NEMA/UL Type 4X/12 for indoor use only |
| Interface Module | Full Numeric LCD |
| Type | Manual |
| w/Brake | Yes |
| w/Resistor | No |
| Rating | Filtered A & B Frames (Optional) C, D, & D Frames (Standard) |
| Network Type | None |
| Control | Enhanced |
| Safe Off | No |
| Feedback | No Feedback - Enhanced Control |
The Allen-Bradley 20AD8P0C3AYNANC0 is a frequency adjustable AC drive from the PowerFlex 70 series. Its input voltage is 480 Volts of 3-phase AC power, which can power motors with 3.7 kW (5.0 HP, 3.0 HP heavy duty) ratings that have 8.0A on its output side. The drive has a 0 to 400 Hertz output frequency range and is wall or machine mountable, with an IP66 protection rating (NEMA/UL Type 4X/12 for indoor use only). The 20AD8P0C3AYNANC0 has a full numeric LCD display, but no communication. Additionally, it is equipped with IGBT break and filtration. It supports enhanced open-loop control (without encoder feedback,) but does not contain an integrated brake resistor. This human-machine interface contains 25 keys; it is engineered to carry out Volts per Hertz, sensorless vector, and vector control with its integrated FORCE technology. It is enhanced with a number of algorithms for fast acting current limit and bus voltage regulation, flying start, PI control, inertia ride-through, and slip compensation. The four lamps on this module’s front panel are labeled as MOD, PORT, NET A, and NET B. For protection purposes of this drive as well as the motor connected to it, a heat sink thermistor is installed on the drive. Other protection mechanisms for this drive include an overcurrent trip feature, a ground fault trip feature, and a short circuit trip feature.
This drive provides a wide spectrum of features, allowing the user to effortlessly integrate it into a pre-existing system’s architecture and configure it for various application requirements. The 20AD8P0C3AYNANC0 AC drive’s outer dimensions are (HxWxD) 9.44 x 6.76 x 8.00 inches (239.80 x 171.70 x 203.30 millimeters). This product’s weight is approximately 3.60 kilograms (7.9 pounds). This is a fan-cooled device (with a fan air inlet on the bottom side) that should be operated in a temperature range of 0 to 40 degrees Celsius (or 32 to 104 degrees Fahrenheit); finally, a zero stacking option is permitted, on the condition that there is a space of 3 inches on both the upper and lower sides of the device).
| Revision Part # | Also known as | |
|---|---|---|
| 20AD8P0C3AYNANC0 Ser A | 20AD8P0C3AYNANC0/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
This Allen Bradley PowerFlex 70 is a 3.7 (5.0) kW(Hp) AC Drive. This PF 70 comes with Enhanced Control, a Full Numeric LCD, and w/Brake. This AB VFD is Frame size B and powered with 480V AC 3 Phase and 3 Amps.
| Width (w/Mounting Hardware) | 6.76 in. (171 mm) |
|---|---|
| Height (w/Mounting Hardware) | 9.44 in. (239.8 mm) |
| Depth | 8.00 in. (203.3 mm) |
| Mounting Bracket Hole Width | 4.83 in. (122.7 mm) |
| Mounting Bracket Hole Height | 8.67 in. (220.2 mm) |
| Mounting Hole Diameter | 0.23 in. (5.8 mm) |
| Weight | 8.0 lb (3.61 kg) |