20AD8P0F0AYNANC0

The 20AD8P0F0AYNANC0 is a PowerFlex70 AC Drive manufactured by Allen-Bradley. The Allen-Bradley 20AD8P0F0AYNANC0 AC Drive belongs to the PowerFlex70 AC Drive Series. The 20AD8P0F0AYNANC0 AC Drive’s characteristics include 8 Amps of current, 5 Horsepower output for normal duty and 3 Horsepower output for heavy-duty applications. It has three-phase installation, a flange mounted front IP20, NEMA Type 1 enclosure, and an optional rear NEMA Type 4X/12 (Indoor/ Outdoor) enclosure. The Allen-Bradley 20AD8P0F0AYNANC0 AC Drive has a conformal coating, IGBT brake, and second environmental filter per the CE EMC directive (89/336/EEC). The Allen-Bradley 20AD8P0F0AYNANC0 AC Drive does not feature an HMI (Blank Plate), a drive-mounted brake resistor, or a communication or feedback module. The Allen-Bradley 20AD8P0F0AYNANC0 AC Drive gives a compact package of power, operator interface, and quality control desired to meet industrial needs for space, simplicity, and reliability. The various features enable the operators to configure the AC drive with the operator architecture design to meet the needs of most applications that use the AC drive.

The Allen-Bradley 20AD8P0F0AYNANC0 AC Drive is set to a relatively low voltage to obtain the higher currents needed by the AC drive. It features a dual current rating with one rating for normal duty and one for heavy-duty applications. It enables the Allen-Bradley 20AD8P0F0AYNANC0 AC Drive to be run by either of the two ratings. The Allen-Bradley 20AD8P0F0AYNANC0 AC Drive has similar conformity characteristics and operations for the ControlNet, DeviceNet, and IP networks. The users should install the drive in a contaminant-free location. When operating the Allen-Bradley 20AD8P0F0AYNANC0 AC Drive, it is recommended that the users operate it across-the-line with the selection of the mode indication on the AC drive. The AC drive control unit is located in a separately removable cassette that is similar to all the Allen-Bradley PowerFlex70 AC Drive ratings, making it easier to install and maintain the entire product line.