Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley PowerFlex 70 20AE017A0AYNNNC0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20AE017A0AYNNNC0

|

This PowerFlex 70 by AB is a 11 kilowatt drive. Additionally, this Allen-Bradley/Rockwell Automation PF70 has a ND output rating of 15 horsepower. This PowerFlex 70 AC drive is a 17 Amp rated AC drive. It has a blank cover instead of the HIM and needs 600 VAC (60 Hz) to operate. This PF70 comes with an enhanced control card installed.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20AE017A0AYNNNC0

ManufacturerAllen Bradley
CategoryDrives
Product LinePowerFlex 70
Part Number20AE017A0AYNNNC0
UPC820919204838
Weight22.00 lbs (9.98 kg)
Voltage600V AC
Ph3
Amps17
kW(Hp)11 (15)
FrameD
EnclosurePanel Mount - IP 20, NEMA/UL Type 1
Interface ModuleBlank Cover
TypeManual
w/BrakeYes
w/ResistorNo
RatingNot Filtered A & B Frames (Optional) C, D & E Frames
Network TypeNone
ControlEnhanced
Safe OffNo
FeedbackNo Feedback - Enhanced Control

The Allen Bradley 20AE017A0AYNNNC0 PowerFlex 70 Adjustable Frequency AC Drive is a microprocessor AC drive with digitally enhanced control, used for excellent control of industrial induction motors in many applications.  This panel mount drive like all Powerflex 70 drives can be programmed for volt per hertz, sensorless vector control, and the enhanced vector control for all-around performance, and it features Bus voltage regulation, motor overload capability, and a fast acting current limit. The 20AE017A0AYNNNC0 has a 3-phase (6-pulse) input voltage of 600 Volts AC, with a 17 Ampere rated drive output current, and with 11 KiloWatts (15 Horse Power) drive rated power output. This drive has -10%/+10% acceptable input range at 47 to 63 Hertz, 97.5% rated operational efficiency, and a rated displacement power factor of 0.98 entire speed range. It has a recommended 2:1 drive to motor power ratio, with 200,000 Ampere maximum short-circuit rating, and it has up to 6000 Volts line transient protection.

The 20AE017A0AYNNNC0 is built to flawlessly ride through 15 milliseconds power outage, and it provides protection against ground fault and phase to phase fault using field removable Metal Oxide Varistor. This drive like all PowerFlex 70 AC drives, provides class 10 electronic motor overload protection, 110% (of rated) output overload capacity for seconds, and it has programmable and independent acceleration and deceleration times. It provides control via sine coded Pulse Width Modulated Signal with 4 kHz control frequency, and it has output frequency range, configurable between 0 to 400 Hertz. Users can selectively adjust output voltage range from 0 to rated motor voltage, it has an internal transistor braking system for smooth motor operation. The 20AE017A0AYNNNC0 has torque performance range of +/-10% without an encoder, and it has a speed relation of 0.1% of base speed across 120:1 speed range. This panel mount drive has a NEMA Type 1 rated industrial enclosure which provides ambient cabinet temperature range of 0 to 50 degree Celsius (32 to 122 degree Fahrenheit) with a storage temperature of –40 to +70 degree Celsius (–40 to +158 degree Fahrenheit). The 20AE017A0AYNNNC0 weighs approximately 6.89 Kilogram (without package), with an approximate dimension of 185.0 x 300.0 x 179.8 millimeters, and it has ABS, c-UL-us, CE, EAC, and KCC certifications.

Revision Part #Also known as
20AE017A0AYNNNC0 Ser A20AE017A0AYNNNC0/A, Series A, Rev A
Don't see your particular revision? Contact us now.