20AE3P9A0AYNNNC0

The 20AE3P9A0AYNNNC0 PowerFlex drive provides different modes of motor control including V/Hz control, Sensorless Vector Control, and Flux Vector Control. It operates on 600 Volt AC -phase input, at maximum 60 Hertz, and provides a power output of 2.2 kW or 3 Horsepower. The 20AE3P9A0AYNNNC0 has an input current rating of 4.4 Amps, 4.5kVA, and output current rating of 3.9 Amps. It has an IP 20 NEMA enclosure which can be panel mounted and has a blank cover interface. The 20AE3P9A0AYNNNC0 drive is certified by UL, cUL, CE, IEC. TUV, RINA, ABS, Lloyd’s Register, and SEMI F47 standards. It also has an internal braking IGBT to switch regenerative energy, and helps saves cost.

The frame measures 171.7 millimeters (6.76 inches) in length, 234.6 millimeters (9.24 inches) in height, and 179.8 millimeters (7.08 inches) in depth. The cutout dimensions are a height of 234.6 millimeters (9.24 inches), a length of  205.2 millimeters (8.08 inches), and a width of 58.8 millimeters (2.31 inches) when viewed from the front. It weighs around 3.6 kilograms or 8 pounds. It is recommended that the 20AE3P9A0AYNNNC0 be mounted in an environment within a temperature of 0 to 50 degrees Celsius (32 to 122 degrees Fahrenheit). The minimum clearance from the closest object should be 76.2 millimeters (3.0 inches). An unshielded cable is sufficient for connecting the 20AE3P9A0AYNNNC0 to its motors. These cables must be separated from sensitive circuits and components. A copper wire cable with an insulation thickness of minimum 0.4 millimeters (0.015 inches) should be used for connections. A shielded cable can be used in cases where components in installations such as a weighing scale or capacitive switches can be affected by noise.