Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 700 20BD014A3NYYAED1

Product image is representative; revision or series may vary. Contact us to request a specific version.

20BD014A3NYYAED1

|
Need a Specific Revision?

The Allen Bradley 20BD014A3NYYAED1 is an adjustable-frequency AC drive designed to support a voltage rating of 480 V AC with a three-phase input at 60 Hz. The continuous output current is 14 A, facilitating applications that require stable performance.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20BD014A3NYYAED1

ManufacturerAllen Bradley
Product TypeAdjustable-frequency AC drive
Product LinePowerFlex 700
Part Number20BD014A3NYYAED1
Weight32.00 lbs (14.51 kg)
Voltage Rating480 V AC, 3ϕ, 60 Hz
Continuous Output Current14 A
Short-time Output Current16.5 A / 22 A
Maximum Output Frequency420 Hz
PWM Carrier Options2–10 kHz
BrakingIGBT + Internal Resistor
DC Bus & Trips648 V DC; UV 305 V; OV 810 V
Apparent Power10.4 kVA
Control Modes & AccuracyVector / V/Hz; ±0.01%
I/OAI 2, AO 2, DI 6, DO 3
Efficiency & Losses97.5%; 218 W
Protection SizingFuse 17.5–50 A; CB ≤50 A
Encoder SupportIncremental Dual-channel, 12 V
CommunicationsEtherNet/IP, DeviceNet, PROFIBUS, Modbus, CAN, TCP/IP, LON
Request a Repair

The part number 20BD014A3NYYAED1 from Allen Bradley is a robust adjustable-frequency AC drive that conforms to the PowerFlex 700 series. This unit primarily operates at a voltage of 480 V AC, designed for three-phase connections, and can handle standard frequency operations at 60 Hz. Designed to deliver continuous output current at 14 A, it effectively meets the demands of various motor control applications. Included in its functionalities are short-time output currents that peak at 16.5 A and provide flexibility for conditions requiring bursts of power, achieving up to 22 A when needed.

This drive boasts a maximum output frequency of 420 Hz, accommodating high-speed motor applications. For PWM modulation, carrier options can be set within a range of 2 kHz to 10 kHz, enabling precise control over the motor. Its braking system combines an IGBT with an internal resistor, providing strong braking capabilities essential for dynamic performance.

In terms of the DC bus, it operates at a nominal voltage of 648 V DC, with under-voltage and over-voltage trip points set at 305 V and 810 V, respectively. With apparent power rated at 10.4 kVA, this drive delivers efficient performance with a loss factor of only 218 W, achieving an impressive efficiency of 97.5%.

For enhanced versatility, it offers a variety of control modes, allowing for Vector and V/Hz control, with high precision of ±0.01%. The I/O configuration includes 2 analog inputs, 2 analog outputs, 6 digital inputs, and 3 digital outputs, facilitating extensive interfacing capabilities. Support for incremental dual-channel encoders at 12 V allows for effective feedback integration. Furthermore, multiple communication options are available, including EtherNet/IP, DeviceNet, PROFIBUS, Modbus, CAN, TCP/IP, and LON, ensuring compatibility with various automation protocols.