Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 700 20BD022A5NYNARB0

Product image is representative; revision or series may vary. Contact us to request a specific version.

20BD022A5NYNARB0

|
Need a Specific Revision?

The 20BD022A5NYNARB0 from Allen Bradley is an adjustable frequency AC drive designed for efficient control in industrial settings. Operating at an input voltage of 480 VAC in a 3-phase configuration, this unit supports a nominal motor power of 15 HP under normal duty conditions.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20BD022A5NYNARB0

ManufacturerAllen Bradley
Product TypeAdjustable Frequency AC Drive
Product LinePowerFlex 700
Part Number20BD022A5NYNARB0
Weight20.00 lbs (9.07 kg)
Input Voltage480 VAC, 3 PH
Nominal Motor Power (Normal Duty)15 HP
Nominal Motor Power (Heavy Duty)10 HP
FeedbackNo Feedback
Degree of ProtectionIP20 / Type 1
Carrier Frequency4 kHz
Maximum Output Frequency420 Hz
Human Interface Module (HIM)LCD Display, Programming Only
Brake IGBTInstalled
Internal Brake ResistorWithout Brake Resistor
Communication ModuleRemote I/O - DPI Module
Control MethodStandard Control with 115V I/O
Output Current22 Amps
Bus Nominal DC Voltage648 V DC
Request a Repair

The Allen Bradley 20BD022A5NYNARB0 operates as an adjustable frequency AC drive specifically suited for three-phase applications. Accepting an input voltage of 480 VAC, this drive is designed to efficiently manage motor operations.

In terms of power, the unit has a nominal capacity of 15 HP for normal duty use, while it can handle 10 HP for heavy-duty applications. Although it does not incorporate feedback mechanisms, its robust design still supports effective motor control. The drive outputs a maximum current of 22 Amps, ensuring reliability in various operational scenarios.

This model allows for a maximum output frequency of 420 Hz, enhancing its versatility in different applications. It operates with a carrier frequency set at 4 kHz. The human interface module is equipped with an LCD display designed for programming only, simplifying user interactions during setup.

The drive's protection degree is classified as IP20 / Type 1, indicating adequate shielding against dust and particulates typically found in controlled environments. The system includes an installed brake IGBT, although it does not come with an internal brake resistor. Communication with this drive is achieved through a remote I/O DPI module, enabling straightforward integration into existing control networks.

The control method is set to standard with 115V I/O connections, facilitating efficient interaction with other system components. The bus nominal DC voltage is rated at 648 V DC, further enhancing the drive's performance in demanding industrial environments.