Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley PowerFlex 700 20BD077A0NYNAED1

Product image is representative; revision or series may vary. Contact us to request a specific version.

20BD077A0NYNAED1

|
Need a Specific Revision?

The 20BD077A0NYNAED1 AC drive from Allen Bradley's PowerFlex 700 series is designed for optimal control in industrial applications. It supports encoder feedback at 12V/5V and features both CE filtering and common mode choke for emissions management. The drive has EtherNet/IP communication capability and operates using vector control with a 115V AC I/O standard.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 20BD077A0NYNAED1

ManufacturerAllen Bradley
Product TypeAC Drive
Product LinePowerFlex 700
Part Number20BD077A0NYNAED1
Weight25.00 lbs (11.34 kg)
Feedback TypeEncoder, 12V/5V
Emission (CE Filter)Yes
Emission (CM Choke)Yes
Comm SlotEtherNet/IP
Control & I/OVector - 115V AC
Carrier Frequency2, 4, 8, and 10 kHz. Drive rating based on 4 kHz
Encoder Quadrature90 degrees, ±27 degrees at 25 °C (77 °F)
AC Input Overvoltage Trip570V AC @ 480V
Input Power Rating60.1 kVA @ 480V AC, 3-phase, normal duty
Dual Element Time Delay Fuse Current Rating80-125A @ 480V AC, 3-phase, heavy duty
Non-Time Delay Fuse Current Rating80-250A @ 480V AC, 3-phase, heavy duty
Digital Input Latency, Typical9.2 ms @ stop signal for SVC motor control
Digital Input Latency9.2-16.0 ms @ start signal for SVC motor control
Stop ModesMultiple programmable stop modes including RA, Coast, DC-brake, Fast brake, RA-to-hold, and S-curve
View as PDF
Request a Repair

The Allen Bradley 20BD077A0NYNAED1 is a robust AC drive suited for dynamic industrial environments. It enables precise motor control with encoder feedback capabilities, operating at both 12V and 5V. Emissions are effectively managed via built-in CE filtering and common mode choke features.

This drive is equipped with an EtherNet/IP communication slot, allowing easy integration into networked applications. It relies on vector control with a 115V AC standard for inputs and outputs. Designed to operate at a carrier frequency of 2, 4, 8, or 10 kHz, it supports a drive rating primarily based on 4 kHz.

At the input, this AC drive handles voltage with an overvoltage trip of 570V at 480V AC. The power rating stands at 60.1 kVA, making it suitable for normal duty applications in three-phase systems. Fuses are accounted for with a dual element time delay rating between 80 and 125A, alongside a non-time delay rating spanning 80 to 250A, both rated at 480V AC.

For quick response times, the typical digital input latency is measured at 9.2 ms when issuing stop signals and varies from 9.2 to 16.0 ms for start commands in SVC motor control setups. Furthermore, the drive offers various programmable stop modes, including options for coast, fast brake, and DC-brake, facilitating enhanced control over motor activities.

Revision Part #Also known as
20BD077A0NYNAED1 Ser A20BD077A0NYNAED1/A, Series A, Rev A
Don't see your particular revision? Contact us now.