Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Servo Drive 1398 1398-DDM-005

Product image is representative; revision or series may vary. Contact us to request a specific version.

1398-DDM-005

|

The Allen-Bradley 1398-DDM-005 has a 120 Vac 0.3 kWatts; 240 Vac 0.6 kWatts Continuous Power Output, a 32-131 F (0-55 C) Operating Temperature, and a 141-339 Volts (DC) Bus Voltage. It also contains a 120 Vac 0.9 kWatts; 240 Vac 1.8 kWatts Peak Power Output and a 7.5 amps Output Peak Current.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1398-DDM-005

ManufacturerAllen Bradley
CategoryDrives
Product LineServo Drive 1398
Part Number1398-DDM-005
UPC662453565200
Weight3.75 lbs (1.70 kg)
Continuous Power Output120 Vac 0.3 kWatts; 240 Vac 0.6 kWatts
Operating Temperature32-131 F (0-55 C)
Peak Power Output120 Vac 0.9 kWatts; 240 Vac 1.8 kWatts
Output Peak Current7.5 amps
Bus Voltage141-339 Volts (DC)
AC Input Current5 amps rms
AC Input Voltage100-240 Vac rms Nominal (Single Phase)
AC Input Frequency47-63 Hz

The Allen-Bradley 1398-DDM-005 ULTRA 100â„¢ is a servo drive that has a compact size. The ULTRA 100â„¢ Family is a part of The 1398 ULTRA â„¢ Series of servo drives. In this module, the display uses a 3-level LED display on its front panel. This module is the lightest drive in the 1398 ULTRA â„¢ Series at 3.7 lbs. The speed control of this module ranges from 0-32.767 RPM. The maximum heat dissipation of this module is about 48W. The 1398-DDM-005 has an AC input voltage of 100-240V AC (RMS) single-phase at 43-63 Hz. The 1398-DDM-005 has an AC input current of 5A. The bus voltage for all drives in the Ultra 100 series is 141-339V DC. The DC bus capacitor can withstand a high voltage after the incoming power has been released, but it will usually discharge in a few seconds.

The Allen-Bradley 1398-DDM-005 has several features including an I/O digital channel that allows users to program the drive to fit the user's desired applications, a touchpad to monitor and modify the drive, and a self-diagnosis feature that can detect faults. This module also has bus overvoltage protection and bus undervoltage protection. The 1398-DDM-005 supports Programmable Logic Controllers (PLCs). The power for the I/O should be provided by an external power source of 12-24V DC. Remember to do periodic maintenance. One of the necessary maintenance treatments is to clean dust and dirt out of the inside of the module. Always check the state of the cable insulation and connections.

Revision Part #Also known as
1398-DDM-005 Ser A1398-DDM-005/A, Series A, Rev A
Don't see your particular revision? Contact us now.