The 1398-DDM-005X ULTRA 100 digital servo drive by Allen-Bradley is a digital drive with DeviceNet, a microprocessor, and a bi-color LED status display. It weighs approximately 1.7 kilograms and it operates optimally at a temperature between 0 and 50 degrees Celsius. It has digital and analog interface input channels, four optically- isolated selectable inputs (Input 1, Input 2, Input 3, and FAULT RESET), and a single ENABLE digital input. It also has two selectable and two dedicated open relay outputs, and a 12 to 24 Volts DC digital I/O power supply.
Additionally, the 1398-DDM-005X has a single 2.0 mA (maximum) 8-bit Analog1 output. It also has motor overload protection from a 200% overload for 8 minutes and a 600% overload for 20 seconds. It has a digital, PI, 300 Hertz, 1 to 8000 rpm (speed range), speed regulator, and a feed-forward digital, PI position regulator. The 1398-DDM-005X has a single-phase AC input voltage of 100 to 240 Volts AC at a frequency of 47 to 63 Hertz, and an AC input current of 5.0 Amps. Additionally, it has an output current of 2.5 Amps, and it can peak at 7.5 Amps, with a power rating of 0.6 kW at 240 Volts AC. It has a bus voltage of 141 to 339 Volts DC, with an energy absorption of 38 joules at 1410uF capacitance. The 1398-DDM-005X has a heat dissipation at 48W and dimensions of 198.12 x 72.60 x 146.05 millimeters.
Repair Services for 1398-DDM-005X
||$1042.96||Add to Cart |
Our highly skilled technicians can repair your 1398-DDM-005X. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Revisions for 1398-DDM-005X
Please refer to the manual for more information about the 1398-DDM-005X such as the wiring diagrams, data sheets,
firmware information and migration or obsolescence details.
|Revision Part #
||Also Known as
||1398-DDM-005X/A, Series A, Rev A
||1398-DDM-005X/B, Series B, Rev B