Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Servo Drive 1398 1398-DDM-009

Product image is representative; revision or series may vary. Contact us to request a specific version.

1398-DDM-009

|
Need a Specific Revision?

The Allen-Bradley 1398-DDM-009 has a 120 Vac 0.6 kWatts; 240 Vac 1.2 kWatts Continuous Power Output, a 15 amps Output Peak Current, and a 9 amps rms AC Input Current. It also contains a 120 Vac 1.3 kWatts; 240 Vac 2.7 kWatts Peak Power Output and a 141-339 Volts (DC) Bus Voltage.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1398-DDM-009

ManufacturerAllen Bradley
CategoryDrives
Product LineServo Drive 1398
Part Number1398-DDM-009
Weight4.00 lbs (1.81 kg)
Operating Temperature32 to 131 degrees Fahrenheit (0 to 55 degrees Celsius)
Continuous Power Output120 Volts AC at 0.6 kWatts; 240 Volts AC at 1.2 kWatts
Output Peak Current15 Amps
Peak Power Output120 Volts AC 1.3 kWatts; 240 Volts AC at 2.7 kWatts
Bus Voltage141-339 Volts (DC)
AC Input Current9 Amps RMS
AC Input Frequency47-63 Hertz
AC Input Voltage100-240 Volts AC RMS Nominal (Single Phase)
View as PDF
Request a Repair

The Allen Bradley 1398-DDM-00 ULTRA 100 Series module is part of a family of universal digital drives. Generally, ULTRA 100 Series drives use microcontrollers to digitally manage the current, velocity, and position of an application. Digital I/O channels allow the user to program the drive to fit a specific application. Power for the I/O of this module must be supplied by a 12 to 24 Volt DC external I/O power source. Some available selections include a single unit, fully enclosing all electronics. An external transformer is not required on the power line. All connectors and indicators are accessible and clearly marked on the front panel.  It is important to keep this unit at a temperature between 32 degrees to 131 degrees Fahrenheit with humidity between 5% and 95%, non-condensing. The drive requires an external 12 to 24 Volt DC power source for the inputs and outputs.  The ULTRA 100 Series is compatible with many motors, drives, and motor parameters; all compatible motors are programmed into each ULTRA 100 Series drive at the factory. Generally, F, H, N, W, and Y series motors will be compatible with Ultra 100 Series drives. The operating temperature range for this module is 0 to 55 degrees Celsius or 32 to 131 degrees Fahrenheit.

Revision Part #Also known as
1398-DDM-009 Ser A1398-DDM-009/A, Series A, Rev A
1398-DDM-009 Ser B1398-DDM-009/B, Series B, Rev B
Don't see your particular revision? Contact us now.