Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Servo Drive 1398 1398-DDM-009-DN

Product image is representative; revision or series may vary. Contact us to request a specific version.

1398-DDM-009-DN

|
Need a Specific Revision?

The Allen-Bradley 1398-DDM-009-DN has a 32-131 F (0-55 C) Operating Temperature, a 120 Vac 0.6 kWatts; 240 Vac 1.2 kWatts Continuous Power Output, and a 141-339 Volts (DC) Bus Voltage. It also contains a 120 Vac 1.3 kWatts; 240 Vac 2.7 kWatts Peak Power Output and a 15 amps Output Peak Current.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 1398-DDM-009-DN

ManufacturerAllen Bradley
CategoryDrives
Product LineServo Drive 1398
Part Number1398-DDM-009-DN
Weight4.75 lbs (2.15 kg)
Operating Temperature32-131 F (0-55 C)
Continuous Power Output120 Vac 0.6 kWatts; 240 Vac 1.2 kWatts
Peak Power Output120 Vac 1.3 kWatts; 240 Vac 2.7 kWatts
Output Peak Current15 amps
Bus Voltage141-339 Volts (DC)
AC Input Current9 amps rms
AC Input Voltage100-240 Vac rms Nominal (Single Phase)
AC Input Frequency47-63 Hz
View as PDF
Request a Repair

The Allen-Bradley 1398-DDM-009-DN Servo Drive weighs 8 lbs. and measures 7.9 x 3.9 x 5.8 inches. The 1398-DDM-009-DN is part of Allen-Bradley’s Ultra 100 series of servo drives. It can function at an ambient temperature range of 32-131 oF. Its nominal AC input voltage is 100-240V AC single-phase Root Means Square (RMS).  Its AC input current is 9 A RMS at 47-63 Hz.

The 1398-DDM-009-DN’s continuous power output is 0.6 kW at 120V AC and 1.2 kW at 240V AC, its peak power output is 1.3 kW at 120V AC and 2.7 kW at 240V AC, and its peak power output 15 A. The 1398-DDM-009-DN’s Bus voltage is 141-339V DC.

Always inspect your 1398-DDM-009-DN servo drive for damage and test all its functions after it arrives.

The 1398-DDM-009-DN uses the DeviceNet network to communicate. It connects to the network through its DeviceNet connector and interface. When connecting the 1398-DDM-009-DN to the DeviceNet network, take note of the network data rate, the topology of cable system you are connecting the 1398-DDM-009-DN to, the distances between the cable system’s components, and the limitations to the trunk and drop cables that you are using.

Revision Part #Also known as
1398-DDM-009-DN Ser A1398-DDM-009-DN/A, Series A, Rev A
Don't see your particular revision? Contact us now.