Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Servo Drive 1398 9101-1810

Product image is representative; revision or series may vary. Contact us to request a specific version.

9101-1810

|
Need a Specific Revision?

The Allen-Bradley 9101-1810 has a 32-131 F (0-55oC) Operating Temperature, a 120 Vac 0.6 kWatts; 240 Vac 1.2 kWatts Continuous Power Output, and a 141-339 Volts (DC) Bus Voltage. It also contains a 120 Vac 1.3 kWatts; 240 Vac 2.7 kWatts Peak Power Output and a 15 amps Output Peak Current.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 9101-1810

ManufacturerAllen Bradley
CategoryDrives
Product LineServo Drive 1398
Part Number9101-1810
Weight5.00 lbs (2.27 kg)
Operating Temperature32-131 F (0-55oC)
Continuous Power Output120 Vac 0.6 kWatts; 240 Vac 1.2 kWatts
Peak Power Output120 Vac 1.3 kWatts; 240 Vac 2.7 kWatts
Output Peak Current15 amps
Bus Voltage141-339 Volts (DC)
AC Input Current9 amps rms
AC Input Frequency47-63 Hz
AC Input Voltage100-240 Vac rms Nominal (Single Phase)
SeriesUltra 200
TypeDigital Servo Drive
View as PDF
Request a Repair

The Allen-Bradley 9101-1810 is a digital servo drive which is a member of the Ultra 200 Series. It weighs approximately 2.15kg (4.8lbs) and measures 20cm by 10cm by 15cm. Operating at an ambient temperature of between 32 and 131 Fahrenheit, the drive requires an input current, frequency, and voltage of 9A RMS, 47-63Hz, and 100-240V AC single-phase nominal RMS, respectively. The drive relies on a nine-pin D-shell serial connector for J4 and J5. For J1, J2, and J3, it relies on 50-, 20-, and 26-pin control and feedback connectors, respectively. The peak output current of the 9101-1810 is 15A. The output peak power is 1.3kW and 2.7kW for 120V AC and 240V AC inputs, respectively. In addition, the drive produces a continuous power of 600W and 1200W given inputs of 120V AC and 240V AC, respectively. Alternatively, an external DC voltage between 141 and 339V DC may be necessary to supplement the supply of internal circuitry power. The 9101-1810 drive can be adapted to either a velocity servo, indexing, master encoder followers, or stepper drive. The DriveNet interface card operates on this drive, enabling the user to command and reprogram the 9101-1810 drive remotely. The 9101-1810 can also be combined with the motor lines of a brushless servo to produce torques. The baud rate of the communications ranges between 1200 baud and 19,200 baud.

Revision Part #Also known as
9101-1810 Ser A9101-1810/A, Series A, Rev A
Don't see your particular revision? Contact us now.