150-S135NBD

The 150-S135NBD controller is a three-phase motor controller that uses a built-in microprocessor device. It is designed according to the application demands and it has the flexibility to meet different application needs. A 135 Amps internal bypass is available in the motor controller. It has an open architecture and it should be protected from water splashes and sprays. It has a line voltage rating between 200 and 480 Volts AC. The rated frequency of the controller is from 50 to 60 Hertz. It is equipped with two relay outputs and a 24 Volts DC input. The 150-S135NBD controller comes with sensorless linear speed acceleration and deceleration which puts less stress on mechanical components than other kinds of acceleration and deceleration. It helps to keep the motor acceleration and deceleration at a constant rate during the initial start up and the final stopping. The dual ramp start feature in the motor controller comes with the ability for the users to select between two profiles with separately adjustable ramp times and initial torque levels.

The Allen-Bradley 150-S135NBD controller is certified with the UL, CSA, EN/IEC, and other industrial standards. It also comes with a CE mark that certifies it for global usage. The 150-S135NBD controller should be operated in a temperature range of 0 and 50 degrees Celsius at up to an altitude of 2000 meters above sea level. The motor controller should be kept away from electromechanical noise and electrostatic discharge. It comes with an alarm contact which alerts the operators about the overload, underload, overvoltage, unbalance, stall, and ground fault situations. The 150-S135NBD controller comes with advanced protection and diagnostics features.