150-B135NBD

The 150-B135NBD is smart motor controller device. It has been manufactured and designed by Allen-Bradley. It is an open type of device with a current rating of 135 Amps. The voltage rating for this device has been set at 460 Volts AC. It belongs to the SMC family of controller devices. It is a solid-state controller device and it has a power rating in the range of 5 to 100 Horsepower. The 150-B135NBD comes inside a NEMA type open enclosure. The control voltage for this device is in the range of 100 to 240 Volts AC.

The 150-B135NBD is a 3-phase device. It runs with a factory set operating temperature in the range of 0 to 50 degrees Celsius. It has an adjustable frequency of 50 to 60 Hertz and the frequency depends on the device load. This smart controller device provides a wide range of operating features. It comes with a soft start with a selectable kickstart, a current limit start to limit the maximum starting current, a dual ramp start for applications with varying torque, and load requirements and a full voltage start when across-the-line starting is needed. The 150-B135NBD also offers various modes for stopping the device. It comes with a soft stop for when an extended length time is required to stop, a pump control stop when the surge during the starting and stopping of a pump is required, a preset slow speed that requires custom slow speed, and a Smart Motor Braking (SMB) method that stops the device faster than the usual speed. It is an ideal choice in industries where the gears and belts of machines can be damaged by line starting, sudden starts and stops, changes in torque, and power restrictions.