150-B240NBDB-8B

The 150-B240NBDB-8B is an SMC Dialog Plus controller manufactured by Allen-Bradley. The Allen-Bradley 150-B240NBDB-8B Dialog controller is part of Series A of the SMC Dialog Plus controllers. The Allen-Bradley 150-B240NBDB-8B Dialog Plus Controller feature 240 Amps of current rating, 5 to 200 Horsepower of output power, 400 Volts AC, 3-phase configuration, 50 to 60 Hertz input line voltage and is solid-state in nature. The Allen-Bradley 150-B240NBDB-8B Dialog controller is contained in an open enclosure. Optional communication devices can be used via the programmable logic controllers to start or stop the Allen-Bradley 150-B240NBDB-8B Dialog Controller. The DIP switch settings located on the communication device determine the amount of information which is transferable from the Allen-Bradley 150-B240NBDB-8B Dialog Controller. The scale factor should be considered while ensuring that the correct value is sent when writing from the PLC’s output image table to the Allen-Bradley 150-B240NBDB-8B Dialog Controller.

It takes about 100 milliseconds for the Allen-Bradley 150-B240NBDB-8B Dialog controller to process a single data request through the SCAN port. The Allen-Bradley 150-B240NBDB-8B Dialog Controller's protective features are easily activated and adjusted via the programming parameters that are available. The Allen-Bradley 150-B240NBDB-8B Dialog Controller is configured with a built-in 2-line,16-character LCD. The fault message is displayed on the first line while the fault code is shown on the second line by the Allen-Bradley 150-B240NBDB-8B Dialog Controller LCD. The LCD’s fault display remains active as long as control power is supplied to the module. When the users cycle the control power; the fault automatically clears, and the Allen-Bradley 150-B240NBDB-8B Dialog Controller will re-initialize and the LCD will indicate a “Stopped” status. When the LCD shows a power loss, it means that an input power phase is missing, and the Allen-Bradley 150-B240NBDB-8B Dialog Controller LCD will identify the phase that is lacking. When the incoming power applied to the Allen-Bradley 150-B240NBDB-8B Dialog Controller features any sequence other than the ABC format, LCD display will indicate a phase reversal.