Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley SMC Dialog Plus 150-B24NBD

Product image is representative; revision or series may vary. Contact us to request a specific version.

150-B24NBD

|
Need a Specific Revision?

The Allen-Bradley 150-B24NBD controller is a smart motor controller from the SMC Dialog Plus series. It does not come with a protective enclosure or any built-in accessories or special motor control functions. The 150-B24NBD smart motor controller has a current rating of 24 Amps, a line voltage rating of 200 to 480 Volts AC, and a control voltage rating of 100 to 240 Volts AC. It also has an ambient operating temperature rating of 0 to 50 degrees Celsius or 32 to 122 degrees Fahrenheit. The 150-B24NBD smart motor controller can generate 15 Horsepower of maximum output power during normal operation.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 150-B24NBD

ManufacturerAllen Bradley
Product TypeSMC Dialog Plus Controller
Product LineSMC Dialog Plus
Part Number150-B24NBD
Weight7.81 lbs (3.54 kg)
Controller TypeSolid-State
Amps24 Amps
Horsepower1 to 15 Horsepower
Voltage460 Volts AC
Enclosure TypeOpen
Input Line Voltage200 to 460 Volts AC, 3-phase, at 50 and 60 Hertz
Power RequirementHeatsink Fan(s)
Control OptionStandard
Control Voltage100 to 240 Volts AC
View as PDF
Request a Repair

The 150-B24NBD is an SMC Dialog Plus controller manufactured by Allen-Bradley. The Allen-Bradley 150-B24NBD Dialog controller is part of Series A of the SMC Dialog plus controllers. The Allen-Bradley 150-B24NBD Dialog controller features 24 Amps of current, 1 to 15 Horsepower, 460 Volts AC input line voltage at 50 to 60 Hertz, and it is solid-state in design. The Allen-Bradley 150-B24NBD Dialog controller is contained in an open enclosure. The Allen-Bradley 150-B24NBD Dialog controller is configured with the Bulletin 825 converter module that is used in providing current feedback for the metering and overload protection during the bypass functions and phase rebalancing. The Allen-Bradley 150-B24NBD Dialog controller enables the operator to set access limitation to the programming system by using password protection. The Allen-Bradley 150-B24NBD Dialog controller is equipped with RAM where it operates its functions after powering up. When the users modify the parameters in the program mode, the RAM will provide a storage location for the new values.

When power is supplied to the Allen-Bradley 150-B24NBD Dialog controller, the parameter values kept in the EEPROM are transferred to RAM. The RAM is volatile and the data kept in this location is lost when the Allen-Bradley 150-B24NBD Dialog controller is switched off. The Allen-Bradley 150-B24NBD Dialog controller normally has factory-set default parameter values which are stored in the non-volatile ROM and the values are displayed the first time the users enter the program mode. The Allen-Bradley 150-B24NBD Dialog controller enables the users to store modified parameter values in the EEPROM, a non-volatile storage memory unit. The Advanced Setup Unit provides full access to the Allen-Bradley 150-B24NBD Dialog controller’s powerful parameter set. While the Allen-Bradley 150-B24NBD Dialog controller controls the user’s motor, the SMC Dialog Plus controller also controls various parameters, enabling a fully functioning metering package. The Allen-Bradley 150-B24NBD Dialog controller provides a variety of unique control options which enhance the motor starting and stopping capabilities.

Revision Part #Also known as
150-B24NBD Ser A150-B24NBD/A, Series A, Rev A
Don't see your particular revision? Contact us now.