Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley SMC Dialog Plus 150-B24NBDA

Product image is representative; revision or series may vary. Contact us to request a specific version.

150-B24NBDA

|

The 150-B24NBDA smart motor controller is an Allen-Bradley/Rockwell Automation SMC Dialog Plus series smart motor controller. It can control motors with a variety of start and stop options, including a special soft stop option. The 150-B24NBDA smart motor controller is rated for 200 to 480 Volts AC of 3-phase line voltage and for 100 to 240 Volts AC of control voltage. It is designed to generate 1 to 15 Horsepower of output power while it operates. The maximum current rating of the 150-B24NBDA smart motor controller is 24 Amps.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 150-B24NBDA

ManufacturerAllen Bradley
Product TypeSMC Dialog Plus Controller
Product LineSMC Dialog Plus
Part Number150-B24NBDA
Weight7.63 lbs (3.46 kg)
Controller TypeSolid-State
Amps24 Amps
Horsepower1 to 15 Horsepower
Voltage460 Volts AC
Enclosure TypeOpen
Input Line Voltage200 to 460 Volts AC, 3-phase, at 50 and 60 Hertz
Power RequirementHeatsink Fan(s)
Control OptionSoft Stop
Control Voltage100 to 240 Volts AC

The 150-B24NBDA is an SMC Dialog Plus controller manufactured by Allen-Bradley. The Allen-Bradley 150-B24NBDA Dialog controller is part of Series A of the SMC Dialog Plus controllers. The Allen-Bradley 150-B24NBDA Dialog controller has ratings of 24 Amps, 1 to 15 Horsepower, 460 Volts AC, 3-phase configuration, 50 to 60 Hertz input line frequency, and it is solid-state in nature. The Allen-Bradley 150-B24NBDA Dialog controller is contained in an open enclosure. The Allen-Bradley 150-B24NBDA Dialog controller can be mounted in a system that has power factor correction capacitors. The capacitors should be placed on the line side of the Allen-Bradley 150-B24NBDA Dialog controller to prevent damage to the SCRs in the Dialog controller. A metal oxide varistor can be mounted on the Allen-Bradley 150-B24NBDA Dialog controller to protect the power devices from electrical transients or high electrical noise. The capacitors are utilized to shunt noise energy away from the Allen-Bradley 150-B24NBDA Dialog controller’s electronics.

The Allen-Bradley 150-B24NBDA Dialog controller is equipped with thermal motor overload protection as a standard feature. However, it should be programmed with the Allen-Bradley 150-B24NBDA Dialog controller. In the bypass settings, the Allen-Bradley 150-B24NBDA Dialog controller’s current sensing capability goes down and the users are recommended to use Bulletin 825 converter device to use current feedback for the applications to maintain the device’s thermal memory and to sustain the power control capability. The Allen-Bradley 150-B24NBDA Dialog controller can be configured with the Bulletin 1201 human-machine interface module for monitoring and programming. The Bulletin 1201 human-machine interface module features 2 parts: a control panel and a display panel. A common fault may occur when the human-machine interface module is removed from the Allen-Bradley 150-B24NBDA Dialog controller while the control logic is enabled. The configured communication module enables the users to integrate the Allen-Bradley 150-B24NBDA Dialog controller with several different communication protocols and networks.

Revision Part #Also known as
150-B24NBDA Ser A150-B24NBDA/A, Series A, Rev A
Don't see your particular revision? Contact us now.