Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley SMC Dialog Plus 40382-811-01

Product image is representative; revision or series may vary. Contact us to request a specific version.

40382-811-01

|
Need a Specific Revision?

The Allen-Bradley 40382-811-01 SMC Dialog Plus module is manufactured as part of the SMC Dialog Plus series of control modules. It is a 24 Volts AC/DC rated standard control module with an input voltage range of 100 to 240 Volts AC, at 50 to 60 Hertz.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 40382-811-01

ManufacturerAllen Bradley
Product TypeSMC Dialog Plus Controller
Product LineSMC Dialog Plus
Part Number40382-811-01
Weight1.00 lbs (0.45 kg)
Line Voltage200 to 480V AC
Current Rating650 A
Control Power Input100 to 240V AC or 24V AC/DC
MicroprocessorSelf-adjustable 0 to 90%
Acceleration0 to 2.0 seconds
Pin SocketPP10 pin and socket series connector
Operating Voltage24V AC/DC
Wire Size14 to 16 AWG
Power Output55 Amps
Request a Repair

The 40382-811-01 controller is an SMC Dialog Plus controller that is manufactured by Allen-Bradley. The device is an SMC Dialog Plus controller that offers a full range of starting options like the soft start with selectable kick start, current limit start with selectable kick start, dual ramp start, and the full voltage start. The SMC Dialog Plus controller operates in 3-phase squirrel cage motors that are rated at 1 to 1000 Amps and 200 to 480 Volts AC or 200 to 600 Volts AC at 50 to 60 Hertz. Depending on the catalog number, this controller will accept a control power input rating of either 100 to 240 Volts AC or 24 Volts AC/DC. If the control power input option is 100 to 240 Volts AC, the controller’s microprocessor will self-adjust to the input control voltage level. The soft start mode on this controller is the start mode that has the most general applications.

The 40382-811-01 controller is user-adjustable from 0 to 90 percent of the locked rotor torque. The acceleration ramp time is user-adjustable from 0 to 30 seconds. The 40382-811-01 controller’s selectable kick start mode is also user-adjustable from 0 to 2.0 seconds. The current limit start feature provides a fixed reduced voltage start and it is used when the controller needs to limit the maximum starting current. The current limit level is user-adjustable from 50 to 60 percent of the motor’s full load current rating, and the current limit time is also user-adjustable from 0 to 30 seconds. The output voltage automatically switches to the full voltage if the 40382-811-01 SMC Dialog Plus controller senses that the motor has gotten fully up to speed during the current limit starting mode. The full voltage start mode is used for applications requiring across-the-line starting and the output voltage will reach the full voltage level within 15 seconds.