Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley SMC Dialog Plus 40888-490-01-S2FX

Product image is representative; revision or series may vary. Contact us to request a specific version.

40888-490-01-S2FX

|
Need a Specific Revision?

The Allen-Bradley 40888-490-01-S2FX standard control module is a replacement control module for the Allen-Bradley SMC Dialog Plus smart motor controllers. This control module accepts 24 Volts AC/DC control power input and it also accepts 200 to 600 Volts AC voltage input.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 40888-490-01-S2FX

ManufacturerAllen Bradley
CategoryDrives
Product LineSMC Dialog Plus
Part Number40888-490-01-S2FX
Weight20.00 lbs (9.07 kg)
DescriptionStandard Control Module
Input Voltage Rating200 to 600 Volts AC (3-Phase)
Current Rating1 to 1000 Amps
Power Rating0.3 to 1000 Horsepower
Frequency50/60 Hertz
Control Power Rating24 Volts AC/DC
Standard Operation ModesFull Voltage, Current Limit, Dual Ramp, and Soft Start
CommunicationFlex I/O, DeviceNet, ControlNet, DH-485, RS-232/422/485 (DF-1), and Remote I/O
ConfigurationBuilt-in Keypad/LCD or HMI
Operating Temperature Range0 to 50 Degrees Celsius
Request a Repair

The Allen-Bradley 40888-490-01-S2FX standard control module is a replacement control module for the Allen-Bradley SMC Dialog Plus smart motor controllers with the standard options. This control module is designed for all SMC Dialog Plus controller ratings. The 40888-490-01-S2FX control module accepts 24 Volts AC/DC control power input and it has a maximum heat dissipation rating of 660 Watts. Like all SMC Dialog Plus controllers, the 40888-490-01-S2FX control module can be programmed and configured using either the built-in keypad and 2-line by 16-character LCD or an optional Bulletin 1201 human-machine interface module (the 1201-DMA, -HAP, -HJP, -HA1, - HA2, or -HJ2). It also supports a wide variety of industrial communication options like the DH-485 or RS-232/422/485 (DF-1), Remote I/O, DeviceNet, Flex I/O, and the SLC Communication Module options via a built-in SCANport serial port.

The 40888-490-01-S2FX control module features built-in diagnostic functions and features designed to enable smooth and seamless operation. The built-in diagnostic and protective features include over-temperature detection via factory-installed internal thermistors, the excessive starts per hour function, underload protection via a programmable underload trip that is programmable from 0 to 99% of the programmed FLA, line faults/shorted SCR protection, open gate fault detection, jam detection, stall protection, overload protection via an integral complex overload algorithm, an energy saver, and a phase rebalance capability. The 40888-490-01-S2FX control module also offers the users 4 standard starting modes for different application needs. These start modes include the general-purpose soft start mode with an acceleration ramp time of 0 to 30 seconds, the current limit start mode with a user-adjustable limit level of 5 to 600% of the FLA, the dual ramp start mode with separately adjustable ramp times and initial torque settings, and the full voltage start mode that is suitable for applications requiring across-the-line starting.