The SMC Dialog Plus series is a series of Allen-Bradley solid-state controllers that are built to provide a full range of starting modes. The SMC Dialog Plus series features the soft start with a selectable Kickstart, the current limit start, the dual ramp start, and the full voltage start modes. The Allen-Bradley SMC Dialog Plus series also features the soft stop, pump control, preset slow speed, Accu-stop, Accu-stop with slow speed at the start, slow speed with braking, and smart motor braking stop modes. The SMC Dialog Plus controllers are designed with electronic motor overload protection as a standard feature. The overload protection enables the SMC Dialog Plus series to meet the applicable operational requirements. The SMC Dialog Plus series also comes with overvoltage protection. Therefore, when the SMC Dialog Plus controllers sense a rise in the incoming line voltage, the built-in overvoltage protection automatically halts motor operation.
Another feature included with the SMC Dialog Plus series is the voltage unbalance protection feature which is detected through the monitoring of the 3-phase supply voltage magnitudes together with the rotational relationships of the 3 phases. The SMC Dialog Plus controllers feature the stall protection and jam detection capabilities. The applications experience locked rotor currents and they have the ability to develop a high torque level in the case of a stall or jam. These conditions result in winding insulation breakdowns or even mechanical damage to the connected loads. The units are programmed to allow the users to have the ability to schedule the allowed number of starts per hour. This is possible through the supported Excess starts per hour feature.
Browse available units in our catalog of SMC Dialog Plus.
This SMC Dialog Plus Controller supports a voltage range of 200 to 460 volts AC and requires a 3-phase input at either 50 or 60 Hz. It features a vented enclosure and provides pump control as a key fu
The 150-B180NBDE-8M SMC Dialog Plus Controller was manufactured by Allen Bradley. It requires a heatsink fan for proper operation. It has an Accu-Stop control option, a load-mounted protective module,
This solid-state controller features an open enclosure design. Its acceptable input line voltages are between 200 and 460 volts AC at 3-phase frequencies of 50 and 60 Hz. Additionally, it supports a c
This controller works with input line voltages from 200 to 575 volts AC and accommodates 3-phase systems at both 50 Hz and 60 Hz frequencies. The unit features an open enclosure design and includes op
This solid-state controller operates with an input range of 200 to 460 volts AC in a 3-phase configuration, suitable for both 50 Hz and 60 Hz power. The open enclosure design allows for easy cooling,
This controller operates effectively in 3-phase systems at frequencies of 50 and 60 Hz. It is designed to work with a range of input line voltages from 200 to 460V AC and features an IP54 (Type 12) en
This controller is suited for handling voltages between 200 to 460 volts AC and can manage 3-phase input at 50 or 60 Hz. It features an open enclosure design and incorporates a heatsink fan for optima
This SMC Dialog Plus controller operates at a solid-state level, with an input line voltage rating from 200 to 460 volts AC. It manages a maximum current of 180 amps. The enclosure is rated IP65, ensu
This solid-state controller supports input line voltages from 200 to 460V AC, compatible with 3-phase systems at both 50 and 60 Hz. It is equipped with a control voltage range of 100 to 240V AC and re
This controller supports an input line voltage of 200 to 460V AC and operates efficiently at 50 and 60 Hz. The unit features an open enclosure design and requires heatsink fans for optimal cooling. Ad