The SMC Dialog Plus series is a series of Allen-Bradley solid-state controllers that are built to provide a full range of starting modes. The SMC Dialog Plus series features the soft start with a selectable Kickstart, the current limit start, the dual ramp start, and the full voltage start modes. The Allen-Bradley SMC Dialog Plus series also features the soft stop, pump control, preset slow speed, Accu-stop, Accu-stop with slow speed at the start, slow speed with braking, and smart motor braking stop modes. The SMC Dialog Plus controllers are designed with electronic motor overload protection as a standard feature. The overload protection enables the SMC Dialog Plus series to meet the applicable operational requirements. The SMC Dialog Plus series also comes with overvoltage protection. Therefore, when the SMC Dialog Plus controllers sense a rise in the incoming line voltage, the built-in overvoltage protection automatically halts motor operation.
Another feature included with the SMC Dialog Plus series is the voltage unbalance protection feature which is detected through the monitoring of the 3-phase supply voltage magnitudes together with the rotational relationships of the 3 phases. The SMC Dialog Plus controllers feature the stall protection and jam detection capabilities. The applications experience locked rotor currents and they have the ability to develop a high torque level in the case of a stall or jam. These conditions result in winding insulation breakdowns or even mechanical damage to the connected loads. The units are programmed to allow the users to have the ability to schedule the allowed number of starts per hour. This is possible through the supported Excess starts per hour feature.
Browse available units in our catalog of SMC Dialog Plus.
This SMC Dialog Plus Controller manages a line voltage ranging from 200 to 460 Volts AC operating in 3-phase at 50 and 60 Hertz. The controller features an IP54 enclosure, protecting it from limited d
This SMC Dialog Plus controller accepts input line voltages ranging from 200 to 460 volts AC in a 3-phase setup, designed for both 50 Hz and 60 Hz operation. The device exhibits an IP65-rated enclosur
Designed for usage in diverse industrial environments, this controller works with input line voltages ranging from 200 to 575V AC on a 3-phase system, accommodating both 50 and 60 Hz frequencies. It f
This controller accepts input line voltages of 200 to 460 volts AC, functioning effectively within 3-phase systems at both 50 Hz and 60 Hz frequencies. It features an open enclosure for ease of access
This controller supports a voltage range of 200 to 460V AC and operates within a 3-phase system at both 50 Hz and 60 Hz frequencies. It features an open enclosure type that facilitates cooling through
This controller features input line voltages that range between 200 and 460 volts AC, suitable for three-phase systems at 50 and 60 Hz. It is designed with an open enclosure type, requires heatsink fa
The 150-B35NCD-8B model is a solid-state controller with a 35 Amp capacity. It handles input voltages from 200 to 575V AC in a 3-phase system at both 50 and 60 Hz. The enclosure is open-type and it op
This model is suitable for 3-phase systems, operating under input line voltages of 200 to 575V AC and at frequencies of 50 or 60 Hz. Its open enclosure type allows for efficient installation and cooli
This controller is designed for 3-phase input voltages between 200 and 575V AC, functioning effectively at both 50 Hz and 60 Hz. The open enclosure design allows for easy access and installation. With
Featuring a three-phase design, the 150-B360NBDE controller handles input line voltages from 200 to 460V AC, accommodating both 50 Hz and 60 Hz frequencies. It operates effectively with a control volt