The SMC Dialog Plus series is a series of Allen-Bradley solid-state controllers that are built to provide a full range of starting modes. The SMC Dialog Plus series features the soft start with a selectable Kickstart, the current limit start, the dual ramp start, and the full voltage start modes. The Allen-Bradley SMC Dialog Plus series also features the soft stop, pump control, preset slow speed, Accu-stop, Accu-stop with slow speed at the start, slow speed with braking, and smart motor braking stop modes. The SMC Dialog Plus controllers are designed with electronic motor overload protection as a standard feature. The overload protection enables the SMC Dialog Plus series to meet the applicable operational requirements. The SMC Dialog Plus series also comes with overvoltage protection. Therefore, when the SMC Dialog Plus controllers sense a rise in the incoming line voltage, the built-in overvoltage protection automatically halts motor operation.
Another feature included with the SMC Dialog Plus series is the voltage unbalance protection feature which is detected through the monitoring of the 3-phase supply voltage magnitudes together with the rotational relationships of the 3 phases. The SMC Dialog Plus controllers feature the stall protection and jam detection capabilities. The applications experience locked rotor currents and they have the ability to develop a high torque level in the case of a stall or jam. These conditions result in winding insulation breakdowns or even mechanical damage to the connected loads. The units are programmed to allow the users to have the ability to schedule the allowed number of starts per hour. This is possible through the supported Excess starts per hour feature.
Browse available units in our catalog of SMC Dialog Plus.
This controller model features IP54-rated enclosure protection suitable for a variety of environments. It accommodates 200 to 460V AC input within a three-phase setup, functioning at both 50 and 60 Hz
This controller operates within a voltage input range of 200 to 460 volts AC, suitable for 3-phase systems at both 50 Hz and 60 Hz. Its vented enclosure allows for effective heat dissipation while req
This controller accepts an input line voltage range from 200 to 208 volts AC in a 3-phase system, suitable for both 50 Hz and 60 Hz operation. Housed in an IP54 enclosure, it ensures protection agains
Designed for robust industrial use, this SMC Dialog Plus Controller functions with a solid-state and isolation contactor setup. It accommodates input line voltages ranging from 200 to 460V AC, suitabl
The 152H-B500JBD-59 offers compatibility with input line voltages ranging from 200 to 460 volts AC and is designed for three-phase systems. It operates efficiently at 50 and 60 Hz frequencies while re
Designed for rigorous environments, this SMC Dialog Plus controller supports input voltages between 200 to 460V AC in a three-phase configuration. Its IP54-rated enclosure offers protection against wa
This three-phase controller unit operates at both 50 Hz and 60 Hz frequencies. Its input voltage capability ranges from 200 to 460V AC. It features an enclosure rated IP54 (Type 12) for protection aga
Operating within the SMC Dialog Plus range, this controller manages input voltages from 200 to 460 volts AC in 3-phase setups. It features an IP54 enclosure, which offers protection against dust and w
This controller has an input line voltage range of 200 to 460 volts AC and operates at both 50 Hz and 60 Hz frequencies. The enclosure is rated IP54, which ensures protection against dust and water in
This controller model is designed for 3-phase input, accepting voltages from 200 to 208V AC. It features an enclosure rated IP54, offering protection in standard industrial environments. The system re