The SMC Dialog Plus series is a series of Allen-Bradley solid-state controllers that are built to provide a full range of starting modes. The SMC Dialog Plus series features the soft start with a selectable Kickstart, the current limit start, the dual ramp start, and the full voltage start modes. The Allen-Bradley SMC Dialog Plus series also features the soft stop, pump control, preset slow speed, Accu-stop, Accu-stop with slow speed at the start, slow speed with braking, and smart motor braking stop modes. The SMC Dialog Plus controllers are designed with electronic motor overload protection as a standard feature. The overload protection enables the SMC Dialog Plus series to meet the applicable operational requirements. The SMC Dialog Plus series also comes with overvoltage protection. Therefore, when the SMC Dialog Plus controllers sense a rise in the incoming line voltage, the built-in overvoltage protection automatically halts motor operation.
Another feature included with the SMC Dialog Plus series is the voltage unbalance protection feature which is detected through the monitoring of the 3-phase supply voltage magnitudes together with the rotational relationships of the 3 phases. The SMC Dialog Plus controllers feature the stall protection and jam detection capabilities. The applications experience locked rotor currents and they have the ability to develop a high torque level in the case of a stall or jam. These conditions result in winding insulation breakdowns or even mechanical damage to the connected loads. The units are programmed to allow the users to have the ability to schedule the allowed number of starts per hour. This is possible through the supported Excess starts per hour feature.
Browse available units in our catalog of SMC Dialog Plus.
This model is designed to function with input line voltages between 200 and 460 volts AC, suitable for 3-phase applications at both 50 Hz and 60 Hz. The enclosure is rated IP54 (Type 12), ensuring pro
This controller can handle input line voltages from 200 to 460 Volts AC and is designed for three-phase operation at both 50 and 60 Hertz. Its IP54-rated enclosure provides adequate protection in vari
This controller supports a 200 to 460V AC input voltage range and is configured for three-phase systems operating at both 50 and 60 Hz. The enclosure is rated IP54, providing adequate protection again
This SMC Dialog Plus controller accommodates input line voltages ranging from 200 to 460 volts AC in a three-phase configuration, functioning efficiently at 50 Hz and 60 Hz. The controller features an
This controller accommodates input line voltages between 200 and 460V AC, suited for three-phase systems at both 50 Hz and 60 Hz frequencies. It features an IP54 (Type 12) enclosure, protecting intern
This controller model utilizes an open enclosure type and operates on a nominal voltage of 460V AC. It is suitable for 3-phase input systems at 50 and 60 Hz frequencies. The controller employs heatsin
This controller offers solid-state performance with a maximum current capability of 180 amps. It operates within an input voltage range of 200 to 575V AC at 50 and 60 Hz. The 150-B180NCR is designed f
This SMC Dialog Plus controller is engineered to function with a 230V AC, 3-phase input line voltage, accommodating both 50 and 60 Hz frequencies. Its vented enclosure assists in thermal management du
This controller accommodates 200 to 460 volts AC input line voltages in a 3-phase configuration, operating at both 50 and 60 Hz. It features an open enclosure design and includes a soft stop control o
This SMC Dialog Plus controller offers a robust input line voltage range of 200 to 575V AC and operates on a 3-phase system at 50 or 60 Hz. It is designed with an open enclosure and requires heatsink