The SMC Dialog Plus series is a series of Allen-Bradley solid-state controllers that are built to provide a full range of starting modes. The SMC Dialog Plus series features the soft start with a selectable Kickstart, the current limit start, the dual ramp start, and the full voltage start modes. The Allen-Bradley SMC Dialog Plus series also features the soft stop, pump control, preset slow speed, Accu-stop, Accu-stop with slow speed at the start, slow speed with braking, and smart motor braking stop modes. The SMC Dialog Plus controllers are designed with electronic motor overload protection as a standard feature. The overload protection enables the SMC Dialog Plus series to meet the applicable operational requirements. The SMC Dialog Plus series also comes with overvoltage protection. Therefore, when the SMC Dialog Plus controllers sense a rise in the incoming line voltage, the built-in overvoltage protection automatically halts motor operation.
Another feature included with the SMC Dialog Plus series is the voltage unbalance protection feature which is detected through the monitoring of the 3-phase supply voltage magnitudes together with the rotational relationships of the 3 phases. The SMC Dialog Plus controllers feature the stall protection and jam detection capabilities. The applications experience locked rotor currents and they have the ability to develop a high torque level in the case of a stall or jam. These conditions result in winding insulation breakdowns or even mechanical damage to the connected loads. The units are programmed to allow the users to have the ability to schedule the allowed number of starts per hour. This is possible through the supported Excess starts per hour feature.
Browse available units in our catalog of SMC Dialog Plus.
This controller model operates on an input voltage range of 200 to 460V AC, accommodating three-phase systems at both 50 and 60 Hz frequencies. The enclosure is rated IP54 (Type 12), offering adequate
This controller operates efficiently on input line voltages that range from 200 to 460 volts AC across three phases, compatible with both 50 Hz and 60 Hz frequency settings. It features an open enclos
This model functions efficiently at a voltage of 460V AC and can handle a horsepower range between 1 and 40. It is designed for 3-phase systems and operates at both 50 and 60 Hz. The open enclosure en
The 150B-B360JBD-8L controller is designed for three-phase input line voltages from 200 to 460V AC while functioning effectively at 50 or 60 Hz frequencies. With an IP54 enclosure rating, this unit is
This controller features rated incoming voltages ranging from 200 to 460 volts AC and effectively supports operation in 3-phase configurations at both 50 and 60 Hz frequencies. It includes an IP32 enc
Designed to operate within input line voltage ranges of 200 to 460 volts AC, this device functions well in both 50 Hz and 60 Hz environments. An IP54 (Type 12) enclosure ensures robust protection agai
This solid-state controller supports 200 horsepower and operates at 460V AC. It features an IP54 enclosure that protects against dust and moisture ingress. Equipped for pump control, it can function e
This controller is designed to handle input line voltages from 200 to 460 volts AC in 3-phase configurations, operating effectively at both 50 Hz and 60 Hz. It features an IP65 (Type 4) enclosure, ens
This model functions with an input line voltage that ranges from 200 to 460V AC in a three-phase system. It features an IP54 enclosure for protection against environmental factors. The controller supp
This SMC Dialog Plus Controller supports an input line voltage range of 200 to 460V AC in a 3-phase configuration. Operating at both 50 and 60 Hz frequencies, it features an IP65-rated enclosure, ensu