The SMC Dialog Plus series is a series of Allen-Bradley solid-state controllers that are built to provide a full range of starting modes. The SMC Dialog Plus series features the soft start with a selectable Kickstart, the current limit start, the dual ramp start, and the full voltage start modes. The Allen-Bradley SMC Dialog Plus series also features the soft stop, pump control, preset slow speed, Accu-stop, Accu-stop with slow speed at the start, slow speed with braking, and smart motor braking stop modes. The SMC Dialog Plus controllers are designed with electronic motor overload protection as a standard feature. The overload protection enables the SMC Dialog Plus series to meet the applicable operational requirements. The SMC Dialog Plus series also comes with overvoltage protection. Therefore, when the SMC Dialog Plus controllers sense a rise in the incoming line voltage, the built-in overvoltage protection automatically halts motor operation.
Another feature included with the SMC Dialog Plus series is the voltage unbalance protection feature which is detected through the monitoring of the 3-phase supply voltage magnitudes together with the rotational relationships of the 3 phases. The SMC Dialog Plus controllers feature the stall protection and jam detection capabilities. The applications experience locked rotor currents and they have the ability to develop a high torque level in the case of a stall or jam. These conditions result in winding insulation breakdowns or even mechanical damage to the connected loads. The units are programmed to allow the users to have the ability to schedule the allowed number of starts per hour. This is possible through the supported Excess starts per hour feature.
Browse available units in our catalog of SMC Dialog Plus.
Part number 153H-B24JBD-42-8L-98X-GK6 operates under an input line voltage range of 200 to 460 volts AC and is designed for three-phase applications at both 50 Hz and 60 Hz frequencies. The IP54 (Type
This controller operates effectively with input line voltages from 200 to 460V AC in a 3-phase configuration. It features an IP32 enclosure, allowing for versatile installation options. The power requ
This SMC Dialog Plus controller operates within an input voltage range of 200 to 460 volts AC in a three-phase setup and supports both 50 Hz and 60 Hz frequencies. The enclosure is rated IP54 (Type 12
This three-phase controller operates on 200 to 460 volts AC and meets the standards for both 50 Hz and 60 Hz frequency applications. It features an IP54-rated enclosure that provides protection agains
This SMC Dialog Plus controller operates at 460V AC with input voltage capabilities spanning 200 to 460 volts AC. It supports 3-phase power at 50 and 60 Hz frequencies. The enclosure is rated IP54 (Ty
The 153H-B54AAD-43 features an input line voltage of 230V AC for 3-phase operation. It supports both 50 and 60 Hz frequencies. This controller's vented enclosure provides necessary cooling, and it ope
Engineered for demanding industrial environments, this controller accommodates input line voltages from 200 to 460V AC and functions efficiently in both 50 Hz and 60 Hz systems. The enclosure is rated
Rated for a maximum of 240 Amps, the 150-B240NBD-8M model provides solid-state control, accommodating a horsepower range of 5 to 200 HP. It accepts input line voltages between 200 and 460 volts AC and
The 150-B24AAD is part of the SMC Dialog Plus series and features a solid-state design. This controller can accommodate up to 24 amps and is rated for 1 to 15 horsepower, operating efficiently at 460V
This controller features an input voltage range of 200 to 575 volts AC and operates effectively in 3-phase configurations at both 50 and 60 Hertz. The unit has an open enclosure design for accessibili