Product image is representative; revision or series may vary. Contact us to request a specific version.
150-F135NBD
The Allen-Bradley 150-F135NBD is a SMC Flex Smart Motor Controller. This motor controller has a line Voltage of 200-460VAC, 3-Phase, 50 and 60 Hz and control Voltage of 100-240V AC (5-480 A units). It delivers maximum continuous output current of 135 Amperes and output power of 100 HP at 460VAC rated voltage with an open type enclosure.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 150-F135NBD
| Manufacturer | Allen Bradley |
|---|---|
| Product Type | Solid State Controller |
| Product Line | SMC-Flex |
| Part Number | 150-F135NBD |
| UPC | 662073047735 |
| Weight | 32.00 lbs (14.51 kg) |
| Control Voltage | 100…240V AC (5…480 A units) |
| Product Family | SMC Flex Smart Motor Controller |
| Bulletin Number | 150 |
| Operating Modes | Soft Start, Full Voltage Start, Smart Motor Braking, Current Limit Start, Dual Ramp Start, Accu-Stop, Selectable Kickstart, Pump Start, Slow Speed with Braking, Coast-to-rest, Preset Slow Speed, Linear Speed Acceleration (Tachometer required), Soft Stop and Pump Stop |
| Line Voltage | 200…460V AC, 3-Phase, 50 and 60 Hz |
| Maximum output Current | 135.0 A |
| Maximum output Power | 100 HP |
| Communications | One DPI provided for connection to optional human interface and one DPI provided for connection to communication |
| Auxiliary Contacts | Four fully programmable contacts as normal/up-to- speed/fault/alarm/network (N.O./N.C.), or external bypass (N.O. only) |
| Metering | Amps, volts, kW, kWh, MW, MWH, elapsed time, power factor, motor thermal capacity usage |
| Protection and Diagnostics | Power loss, line fault, voltage unbalance, excessive starts/hour, phase reversal, undervoltage, overvoltage, controller temp, stall, jam, open gate, overload, underload, communication fault. |
| Enclosure Type | Open |
| Controller Rating | 135 A, 100 Horsepower at 460 Volts AC |
| Input Line Voltage | 200 to 460 Volts AC, 3-phase, 50 to 60 Hertz |
| Rated Voltage | 200 to 460 Volts AC |
The Allen-Bradley 150-F135NBD is a SMC Flex Smart Motor controller. This controller is generally termed as soft-starter that is typically used to protect motors during start-up sequence however, this smart motor controller is not limited to starting functions as it also offers appropriate control modes for stopping sequence and idle operation of the motor.
The 150-F135NBD Smart Motor Controller is capable of Soft Start, Full Voltage Start, Smart Motor Braking, Current Limit Start, Dual Ramp Start, Accu-Stop, Selectable Kickstart, Pump Start, Slow Speed with Braking, Coast-to-rest, Preset Slow Speed, Linear Speed Acceleration (Tachometer required), Soft Stop and Pump Stop.
The 150-F135NBD’s line voltage is 200-460VAC, 3-Phase, with frequency of 50 and 60 Hz while device control voltage is 100-240V AC (5-480 A units). With the appropriate voltage supplied, this motor controller delivers maximum continuous output current of 135 Amperes and output power of 100 HP at 460VAC rated voltage with an open type enclosure. Additionally, the 150-F135NBD may be used as line controller and delta controller. Depending on the controller mode, the output characteristics varies.
In addition, the 150-F135NBD is capable of detecting Power loss, line fault, voltage unbalance, excessive starts/hour, phase reversal, undervoltage, overvoltage, controller temp, stall, jam, open gate, overload, underload, even, communication fault. It is also capable of metering functions wherein the controller may be configured to totalize Amps, volts, kW, kWh, MW, MWH, elapsed time, power factor, and motor thermal capacity usage. It is also provided with an alarm contact that enables this device to externally signal Overload, underload, undervoltage, overvoltage, unbalance, jam, stall, and ground fault conditions.
| Revision Part # | Also known as | |
|---|---|---|
| 150-F135NBD Ser A | 150-F135NBD/A, Series A, Rev A | |
| 150-F135NBD Ser B | 150-F135NBD/B, Series B, Rev B | |
| Don't see your particular revision? Contact us now. | ||
- 150-F135N8D
- 150-FI35NBD
- 150F135N8D
- 150F135NBD
- 150FI35NBD
- 15O-F135NBD
- 15OF135NBD
- I50-F135NBD
- I50-FI35NBD
- I50F135NBD
- I50FI35NBD
- I5O-FI35N8D
- I5OFI35N8D
Does the 150-F135NBD come with a warranty?
Yes, the 150-F135NBD includes a free 2-year DO Supply warranty. You can upgrade to a 3-year warranty at checkout for even more protection.
What is the function of the 150-F135NBD’s relay output contact?
The 150-F135NBD’s relay contact output is used to provide feedback regarding the controller’s Overload, underload, undervoltage, overvoltage, unbalance, jam, stall, and ground fault conditions.
How many auxiliary contacts does the 150-F135NBD have?
The 150-F135NBD has Four fully programmable contacts in the form of Normally Open (N.O) and Normally Closed (N.C.) assignable as normal/up-to- speed/fault/alarm/network and Normally Open (N.O) contact for external bypass.
What are the starting and stopping modes supported by the 150-F135NBD?
The 150-F135NBD supported starting and stopping modes are Soft Start Current Limit Start Dual Ramp Full Voltage Linear Speed Acceleration Preset Slow Speed Soft Stop.
Solid State Controller with open enclosure, 135 A, 100 Hp @ 460V AC Controller Rating, and 200-460V AC, 3-phase, 50 and 60 Hz Input Line
| Width | 7.74 in. (196.4 mm) |
|---|---|
| Height | 17.47 in. (443.7 mm) |
| Depth | 8.35 in. (212.2 mm) |
| Approx Ship. Wt. | 33 lb (15 kg) |