Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley SMC-Flex 150-F25NBDB

Product image is representative; revision or series may vary. Contact us to request a specific version.

150-F25NBDB

|
Need a Specific Revision?

The Allen-Bradley 150-F25NBDB SMC-Flex solid-state controller has an open enclosure type, an input line voltage of 200 to 480 Volts AC, 3-phase voltage, 50 to 60 Hertz frequency, and a control voltage of 100 to 240 Volts AC. There is an available option of pump control for the controller.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 150-F25NBDB

ManufacturerAllen Bradley
CategoryDrives
Product LineSMC-Flex
Part Number150-F25NBDB
UPC781180617645
Weight6.94 lbs (3.15 kg)
Enclosure TypeOpen
Input Line Voltage200 to 480 Volts AC, 3-Phase, 50 to 60 Hertz
Control Voltage100 to 240 Volts AC
Control OptionsPump Control
Controller TypeBulletin 150, Solid State
Controller Rating25 Amps, 5 to 15 Horsepower at 460 Volts AC
Altitude Rating2000 meters
Humidity Rating5 to 95% (non-condensing)
Temp. Rating (Open)-5 to 50 degrees Celsius
Temp. Rating (Enclosed)-5 to 40 degrees Celsius
Request a Repair

The 150-F25NBDB controller is an SMC-Flex solid-state controller from Allen-Bradley. The controller has an input line voltage range of 200 to 480 Volts AC, 3-Phase, 50 to 60 Hertz frequency, and a control voltage of 100 to 240 Volts AC. The power wiring on the 150-F25NBDB SMC-Flex smart motor controller includes a standard squirrel-cage induction motor, or a Wye-Delta, 6-lead motor. The control wiring for installation includes 2-wire and-3 wire control to maximize the variety of applications that the controller can support.

There is 1 DPI port on the 150-F25NBDB controller for connection to another human-machine interface device, and the controller's starting and stopping modes include the soft start, current limit start, dual ramp, full voltage, linear speed acceleration, preset slow speed, and the soft stop. The 150-F25NBDB controller includes protection from power loss, line faults, voltage unbalance, excessive starts per hour, phase reversal, under and over-voltage, excessive controller temperature, stalling, jams, open gates, overloading, underloading, and communication fault protection. For metering, the controller takes measurements in Amps, Volts, kW, kWH, mW, mWH, elapsed time, power factor, and motor thermal capacity usage. Status indicator lights are also included, and they indicate when the controller is stopping, starting, getting up to speed, sounding an alarm, or experiencing a fault.