The 150-F43NCD is a Smart Motor Controller manufactured and designed by Allen-Bradley. This controller belongs to the SMC Flex series of Smart Motor Controllers, specifically soft starter controllers. This motor controller offers a modular design with advanced features like performance, diagnostics, and intelligence, reducing at the same time energy costs. The 150-F43NCD Smart Motor Controller operates with an input voltage rating of 100 to 240 Volts AC, a frequency of 50 to 60 Hertz and a tolerance of +/- 10%. It has a motor current rating of 14.9 to 74 Amps and a Horsepower rating of 45 Hp at 50 Hertz and a 60 Hp at 60 Hertz. The 150-F43NCD Smart Motor Controller features a built-in LCD display and keypad, an integrated bypass and nine modes to start and stop the motor combined with three slow-speed modes. It also offers a metering and diagnostic mechanism. The LCD display and keypad enable operators and personnel to visualize data related to the process, input data, change variables and adjust variables when required.

The 150-F43NCD Smart Motor Controller main functions are starting and stopping the motor, limit control at more than one speeds, reduce torque and start current. Being fully programmable, it can be adjusted and set up. When it comes to the control of options, it has standard pump control and braking control. The 150-F43NCD Smart Motor Controller is the ideal starter to work with bandsaws, since it has the ability to minimize starting peaks, stop the motor in just two minutes, diagnostic jam, stall and shut off the motor in any case to prevent further damages. This controller can also work with compressors, pumps, and centrifuges.