Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley Ultra3000-5000 2098-DSD-030

Product image is representative; revision or series may vary. Contact us to request a specific version.

2098-DSD-030

|
Need a Specific Revision?

The Allen-Bradley 2098-DSD-030 drive is a digital servo drive from the Ultra 3000 drive series. It has a single-phase AC-input voltage range from 100 to 240 Volts AC, RMS. The 2098-DSD-030 digital servo drive also supports an AC-rated input frequency range of 47 to 63 Hertz. It can only support 1 contactor cycle within a 2-minute time span. The 2098-DSD-030 digital servo drive has a recommended wire size of 10 AWG.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2098-DSD-030

ManufacturerAllen Bradley
CategoryDrives
Product LineUltra3000-5000
Part Number2098-DSD-030
UPC662453934426
Weight14.25 lbs (6.46 kg)
Shunt On420 V dc
Bus Overvoltage452 V dc
Bus Capacitance2820 ?F
Input Voltage (AC)120 - 240 Voltage rms, 1-Phase
Input Frequency (AC)47-63 Hz
Output Current (Continuous)15Amps (0-peak)
Output Current (Intermittent)30 Amps (0-peak)
Continuous output power @ 230 VAC1.5 kW
Continuous output power @ 480 VAC3 kW
Shunt Off402 V dc
I/O ChannelsEight (8) Discrete input signals; Four (4) discrete output; One (1) Normally Open (N.O.) relay contact output; One (1) Analog current limit input; One (1) Programmable analog output.
SeriesUltra 3000 Drives
Auxiliary Power SupplyNo
Nominal Input Current (AC)28 Amps Root Means Square
FeaturesStandard
Internal Shunt Resistance35 Ohms
Request a Repair

The Allen-Bradley 2098-DSD-030 is part of the high-performance family of the Bulletin 2098 Ultra3000 Digital Servo Drives. It has an analog command and communication interface. It features AC input power, motor power, and passive shunt resistor connections and a motor power cable shield clamp at its front panel. Its 9-pin CN3 serial port connector, 15-pin CN2 motor feedback connector, and 44-pin CN1 user input/output connector are all female, D-sub types in high-density construction. Plus, it has logic power and seven-segment status indicators for easy monitoring and troubleshooting. The 2098-DSD-030 Analog Servo Drive has a COMMAND analog input with 14-bit A/D, ±10V rating, and ILIMIT analog input rated at 10-bit A/D, 0 to 10V. Its 8 bits analog output has specifications of ±10V, 2 mA max. It accepts single-ended, differential, and open collector input types but the differential is recommended. The 15A/30A 2098-DSD-030 Drive comes in a compact, space-saving package that weighs approximately 6.2 kg (13.6 lb). It comes with a nominal 100-240V rms single-phase AC input voltage with a frequency of 47-63 Hz. It features an internal shunt resistance rated at 35 Ohms . It has product dimensions of 3.6 x 2 x 0.8 x 9.6 inches (91.44 x 50.8 x 20.32 x 243.84 mm).

The Allen-Bradley 2098-DSD-030 is a Digital Servo Drive (DSD) from the Ultra 3000 system. This motion control system is part of the larger Kinetix Product range. This servo drive supports a variety of servo motors including the Kinetix MP series, specifically the MPL-A/B, MPF-A/B, and MPS-A/B servol motors. It may also be used to drive H-Series, F-Series, and Y-Series servo motors.

The 2098-DSD-030 operates at an input supply voltage of 100-240 Volts AC rms, 1-phase along an input frequency of 47-63 Hertz and input current of 28 Amperes (nominal) and maximum inrush current of 50 Amperes @ 230 Volts AC. Auxilliary input current includes 1.0 Ampere @ 115 VoltsAC, nominal; 0.5 Amperes @ 230 Volts AC, nominal; maximum inrush current of 47 Amperes @ 115 Volts AC; 95 maximum inrush current of 95 Amperes @ 230 Volts AC. This servo drive delivers a continuous output current of 15 Amperes and intermittent output power of 30 Amperes. It has a continuous output power of 1.5 Kilowatts at 115 Volts AC input and 3.0 Kilowatts at 230 Volts AC input.

The 2098-DSD-030 has one (1) RS-232 Serial interface that can be used for RS-232, Point-to-point connection, or RS-485, multi-drive communication. This connection enables users to conveniently configure and visualize the drive parameters for accurate, efficient, and faster configuration and commissioning period.

The 2098-DSD-030 can be connected to a ControlLogix controller via the 2090-U3xBB-DMxx Drive-mounted Breakout Board for I/O and Commands.

Revision Part #Also known as
2098-DSD-030 Ser A2098-DSD-030/A, Series A, Rev A
2098-DSD-030 Ser B2098-DSD-030/B, Series B, Rev B
Don't see your particular revision? Contact us now.