Product image is representative; revision or series may vary. Contact us to request a specific version.
2098-DSD-HV150X
The Allen-Bradley/Rockwell Automation 2098-DSD-HV150X drive is a servo drive from the Ultra 3000-5000 drive series. It has a 3-phase RMS voltage range from 230 to 480 Volts AC at 47 to 63 Herta. The 2098-DSD-HV150X servo drive comes with a built-in indexing feature. It also supports an auxiliary power supply. The 2098-DSD-HV150X servo drive has a storage temperature range from -40 to 70 degrees Celsius or -40 to 158 degrees Fahrenheit and an operating temperature range from 0 to 55 degrees Celsius or 32 to 131 degrees Fahrenheit.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for 2098-DSD-HV150X
| Manufacturer | Allen Bradley |
|---|---|
| Category | Drives |
| Product Line | Ultra3000-5000 |
| Part Number | 2098-DSD-HV150X |
| UPC | 662453959382 |
| Weight | 23.00 lbs (10.43 kg) |
| Series | Ultra 3000 Drives |
| Output Current (Intermittent) | 68 Amps (0-peak) |
| Output Current (Continuous) | 34 Amps (0-peak) |
| Auxiliary Power Supply | Yes |
| Nominal Input Current (AC) | 20 Amps Root Means Square |
| Input Frequency (AC) | 47-63 Hz |
| Input Voltage (AC) | 230-480 Voltage Root Means Square (Three Phase) |
| Bus Overvoltage | 810 Volts dc |
| Shunt On | 800 Volts dc |
| Features | Indexing |
| Internal Shunt Resistance | 25 Ohms |
The Allen-Bradley 2098-DSD-HV150X has an input voltage (AC) of 230-480V AC root means square (three-phase). This module has an input frequency (AC) of 47-63 Hertz and a nominal input current (AC) of 20A root means square. It also has a 34A (0 to peak) continuous output current and 68A (0 to peak) intermittent output current. The dimensions of the 2098-DSD-HV150X are 9.54 x 14.2 x 5.97 in. (242.2 x 360.7 x 151.6 mm). The weight of this module is around 10.44 kg (22.96 lbs). The 2098-DSD-HV150X also follows Electromagnetic Compatibility (EMC) standards. The Allen-Bradley 2098-DSD-HV150X has passed the EN 50081-2 EMC - Generic Emission Standard, Part 2 - Industrial Environment. This module has passed EN 50082-2 EMC – Generic Immunity Standard, Part 2 - Industrial Environment. If you are connecting or disconnecting the cable with power applied to this module or any device on the network, an electrical arc can occur. The Allen-Bradley 2098-DSD-HV150X has internal shunt resistance of 25 Ω. The Shunt-On of this module is 800V DC. The Shunt-Off of this module is 750V DC. This module contains a set of parameters used to configure and monitor drives. This module has a faulted-node recovery feature that allows the node address of a device to be changed even when it is faulted on the network. Do not try to replace the faulty drive module circuit. You must determine the cause of the error and fix it before you try to operate the system.
| Revision Part # | Also known as | |
|---|---|---|
| 2098-DSD-HV150X Ser A | 2098-DSD-HV150X/A, Series A, Rev A | |
| Don't see your particular revision? Contact us now. | ||
- 2098-DSD-HV15OX
- 2098-DSD-HVI50X
- 2098DSDHV150X
- 2098DSDHV15OX
- 2098DSDHVI50X
- 209B-DSD-HV150X
- 209BDSDHV150X
- 2O98-DSD-HV150X
- 2O98-DSD-HV15OX
- 2O98DSDHV150X
- 2O98DSDHV15OX
- 2O9B-DSD-HVI5OX
- 2O9BDSDHVI5OX
The Allen-Bradley 2098-DSD-HV150X Servo Drive has a 68 Amps (0-peak) Output Current (Intermittent), a 34 Amps (0-peak) Output Current (Continuous), and a 47-63 Hz Input Frequency (AC). It also has a 230-480 Voltage Root Means Square (Three Phase) Input Voltage (AC) and a 940 ?F Bus Capacitance.