2098-DSD-HV220

The Allen-Bradley 2098-DSD-HV220 is an Ultra 3000 Drive. This drive is an intelligent drive that support modern integration and configuration methods.

USB connection support USB 1.0 and 2.0 versions and support communication rates of 1200, 2400, 4800, 9600, or 19,200, bps using USB 1.0 and 1200, 2400, 4800, 9600, 19,200, or 38,400 bps using USB 2.0 port.

The 2098-DSD-HV220 has Continuous Output Current of 47A, Intermittent Output Current of 94A, Continuous Power Output of 230V ac input at 11 kW and 460V ac input at 22 kW. This drive is powered by supplying an input voltage range of 230-480V rms, 3-phase along an input frequency of 47-63 Hz.

Before using this system, use standard high-density D-shell connectors that have the acceptable standards and codes with the applicable laws and use the proper circuit breakers due to possible high current inrush. In the 2098-DSD-HV220, the connector pinout has separate pins for the RS-232 and the RS-422/RS-485 signals, so that the communication standard can be changed by using a different cable. Make sure you are using the appropriate amount of shunt capacitance to protect the device against sudden surges that can damage the whole circuit. The 2098-DSD-HV220 is a servo drive that meets global voltage requirements and it can perform in a variety of machine control applications. This system works with the LPJ-35SP fuse which has 460V as its input voltage. The 2098-DSD-HV220 is approved for use in hazardous locations, and it is fit for operation at a temperature range of 0-55 degrees Celsius. You can store the servo drive at a temperature range of -40-70 degrees Celsius. It can be operated and stored at a maximum altitude of 1500m; above this height, it derates by 3% for every additional 300m. When mounting the shunt module inside the enclosure, separate the shunt power cables from the other sensitive, low-voltage cables and when installing the 2098-DSD-HV220 inside an enclosure, run the input power wiring in a conduit outside the enclosure. The Allen-Bradley 2098-DSD-HV220 is a strong drive with an Input Voltage (AC) of 230-480 Voltage Root Means Square (Three Phase), an Input Frequency (AC) of 47-63 Hertz, and a Nominal Input Current (AC) of 28 Amperes Root Means Square. It also has a 47 Amperes (0-peak) Continuous Output Current and 94 Amperes (0-peak) Intermittent Output Current, all contained in its convenient 9.54 x 15.43 x 8in dimensions.