Free UPS Ground on All Orders!
+1 (919) 205-4392
Allen Bradley Ultra3000-5000 2098-IPD-005-DN

Product image is representative; revision or series may vary. Contact us to request a specific version.

2098-IPD-005-DN

|

The 2098-IPD-005-DN intelligent positioning drive is an Allen-Bradley/Rockwell Automation Ultra 5000 series intelligent positioning drive. It is AC-powered and it operates with 100 to 240 Volts AC RMS 1-phase input voltage. The 2098-IPD-005-DN intelligent positioning drive supports a DeviceNet interface for communication and it has several serial ports on its front panel for connecting to other devices. This small drive only weighs about 4.7 pounds and it can operate in a temperature range from 32 to 131 degrees Fahrenheit and in a relative humidity range from 5 to 90% without condensation. The 2098-IPD-005-DN intelligent positioning drive supports an input frequency range from 47 to 63 Hertz.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for 2098-IPD-005-DN

ManufacturerAllen Bradley
CategoryDrives
Product LineUltra3000-5000
Part Number2098-IPD-005-DN
Weight6.00 lbs (2.72 kg)
SeriesUltra 5000 Drives
Output Current (Intermittent)N/A
Output Current (Continuous)2.5 Amps (0-peak)
Auxiliary Power SupplyNo
Nominal Input Current (AC)5 Amps Root Means Square
Input Frequency (AC)47-63 Hz
Input Voltage (AC)100-240 Voltage Root Means Square (Single Phase)
Internal Shunt ResistanceN/A
Bus OvervoltageN/A
Shunt OnN/A
FeaturesDeviceNet
Bus CapacitanceN/A

The Allen Bradley Ultra5000 2098-IPD-005-DN is the lowest Power model, DeviceNet enabled AC Servo drive in the family of Ultra5000 Programmable, high speed, high precision, Intelligent Positioning Drives.

The 2098-IPD-005-DN is fed with a 230 Volt AC single phase input and can drive a 3-phase servo motor with a Continuous Power Output of 500 Watts, which is sufficient for driving small servo motors that are typically found in low end motion control Applications like packaging, filling, pick & place, Small CNC routers, etc.

The Ultra5000 2098-IPD-005-DN provides a plethora of GPIO with 16 optically isolated 12 to 24 Volt DC digital inputs, 7 optically isolated 12 to 24 Volt DC loads, 2 analog inputs and 2 analog outputs packed with ADCs with a -10 to 10 Volt range and 12-bits of resolution.

The 2098-IPD-005-DN can be connected to Absolute, Sine/Cosine, Intelligent, and Incremental Encoders, with a maximum frequency of 2.5 MHZ per channel in case of TTL channel signals and 100 kHz in case of Sine/Cosine Input. The capture latency of the position is less than 1.0 μs and position-based calculation can be done in small time frame as low as 125 μs

DeviceNet Connectivity is available in 2098-IPD-005-DN, which means that online configuration and status monitoring can be completed for the drive from any remote controller, HMI or even SCADA/DCS system that supports the same communication protocol.

Revision Part #Also known as
2098-IPD-005-DN Ser A2098-IPD-005-DN/A, Series A, Rev A
Don't see your particular revision? Contact us now.