2098-IPD-030

The 2098-IPD-030 is an intelligent positioning drive that is part of the Ultra 5000 product family. This drive is paired to an appropriate servo motor and used to an application that requires high positioning accuracy. This drive operates at an AC input voltage range of 100-240Vrms, 1-Phase along an input frequency of 47-63 Hz. The drive’s output characteristics include delivers output power of 1.5kW at 115 VAC input and 3.0 kW at 230VAC input while the output current of the 2098-IPD-030 is 30A Output Peak Current and 10A Continuous Output Current.

This servo drive is classified as a controlgear device. With this, the 2098-IPD-030 must be mounted to an enclosure that meets the requirements laid out by the IEC60529 standard. The enclosure must be located in an even surface with rigid and vertical surface. Shock limiting devices must also be installed and industrial contaminants and particulates must be prevented from entry. The ambient temperature must be controlled and not to exceed 55° C (131° F). Fans and heaters may also be installed to appropriate control the internal climate of the enclosure. Additionally, the recommended mounting clearances must be followed such as 12.7 mm or 0.5 in. side clearances and 50.8 mm or 2.0 in. top and bottom clearances. Maintaining the minimum clearance ensures natural air flow and ventilation is provided to the drive. Additionally, these mounting clearance provides a comfortable working space in the event of troubleshooting and maintenance.

The drive’s auxiliary input has a rating of 1A at 230V AC and a maximum inrush current of 95A at 230V AC (RMS). The 2098-IPD-030 has a continuous output rating of 15A with the output current peaking at 30A and a BUS capacitance of 2820µF. the drive has an internal shunt with a resistance of 35Ω and a shunt voltage of 420V DC and 402V DC for both shunt ON and shunt OFF. It has an internal shunt power of 50W (continuous) which peaks at 3.5KW and provides BUS overvoltage at 452V DC. The 2098-IPD-030 requires a 6KW maximum external shunt with 30 Ohms (-0/+5%) resistance. The drive has an overall power output of 3KW at 230V AC and a maximum energy absorption of 139J at 230V AC. Is fussed with a 230V AC Class CC and J fuses and it dissipates 150W (with a dissipative shunt) heat when operational. The 2098-IPD-030 communicates through the double RS-232/RS-422/RS-485 communication port with communication rates of 1200, 2400, 4800, 9600, 19200, and 38400 bits per second. It has 16 optically-isolated 12-24V DC general purposes digital inputs and 7 optically-isolated 12-24V DC outputs with 50mA max current. The 2098-IPD-030 also has a single normally-open relay (N.O.) outputs with 30V DC maximum 1A maximum current rating and the drive has an overall I/O response time of 100 µs. It uses a 100,000-write cycles user memory with a 512 Kbps program capacity and a high-speed SRAM/EEPROM non-volatile memory with 32 Kbps memory capacity. The drive has an operational temperature range of 0-55 °C (32-131 °F) at 5-95% non-condensing relative humidity and it is built to operate without de-rating at an altitude of 1500m (5000ft) but it will begin to de-rate at 3% for each 300m above 1500m. The 2098-IPD-030 weighs approximately 6.16Kg (13.58) and dimensions of 92.7mm x 50.8mm x 20.3mm (3.65in x 2.0in x 0.8in).