2098-IPD-HV150-DN

The Allen Bradley 2098-IPD-HV150-DN is a High Voltage Ultra 5000 Intelligent Positioning Drive with a DeviceNet communication interface. With a modern DSP based control architecture and a strong IPM based power section, this unit is fully programmable using motion commands in an ANSI C format. With an optimized design, its high-speed position capturing has a latency less than 1.0μs.

The 2098-IPD-HV150-DN has a 15 kW continuous power output at 480 Volts AC. At a weight of 23.72 pounds and with dimensions of 6.97 x 14.20 x 13.05 inches, this unit has 16 optically isolated inputs, 7 optically isolated outputs, and 1 normally open relay output. It requires a three-phase AC input voltage of 230 to 480 Volts RMS, as well as an AC input frequency of 47 to 63 Hertz and a 20 Amperes nominal RMS AC input current. Its continuous output current is 24.0 A for RMS value and 34 A for 0-peak value, while its peak output current rests at 48.1 A for RMS and 68 A for 0-peak Value. It has 940µF Bus capacitance, 25Ω internal shunt resistance, 810 Volts DC Bus overvoltage, 512 Kbps flash memory and 23 Kbps non-volatile SRAM for storage, and its maximum power dissipation is 350 Watts with a dissipative shunt.

A primary feature of this module is the ability to establish up to five Group 3 Explicit Messaging connections using Unconnected Message Manager (UCMM). It has data rates of 125, 250 and 500 kbps with node addresses ranging from 00 to 63. Additionally, it allows changes in the faulted node addresses of a device using its faulted-node recovery feature.