9101-2352

The Allen-Bradley 9101-2352 drive, also known as the 2098-DSD-020X-DN drive, is an Ultra 3000 series indexing drive with a DeviceNet interface. The input voltage for the 9101-2352 drive is 100 to 230 Volts AC (single-phase, at 47 to 63 Hertz). The nominal input current is 18 Amps. The continuous output current (RMS) is 7.1 Amps and the continuous output current (0-pk) is 10 Amps. The peak output current (RMS) is 21.2 Amps and the peak output current (0-pk) is 30 Amps. The Bus capacitance for the drive is 1880 microfarads. The Bus overvoltage threshold is 400 Volts DC. The energy absorption capability of the drive at 115 Volts AC input is 125 joules and at 230 Volts AC, it is 51 joules. The continuous output power of the drive at 115 and 230 Volts AC is 1 kilowatt and 2 kilowatts, respectively. The maximum power dissipation for the drive is 50 Watts.

For the DeviceNet interface on the 9101-2352 drive, the power consumption from the network is 60 milliamps, the supported data rates are 125, 260, and 600 kbps, the supported node addresses are from 00 to 63, and the messaging capabilities supported at explicit, change of state, polled I/O, and cyclic messaging. The 9101-2352 drive supports 8 optically-isolated digital inputs rated at 12 to 24 Volts. Four optically isolated 12 to 24 Volts digital outputs are also available. The drive also supports one normally-open relay rated for 30 Volts DC and 1 Amp. The dimensions of the 9101-2352 drive are 186.18 x 121.54 x 129.03 millimeters and its approximate weight is 2.1 kilograms. The ambient storage and operating temperature ranges are -40 to 158 degrees Fahrenheit and 32 to 131 degrees Fahrenheit, respectively. The maximum recommended altitude for drive installation is 1500 meters.