Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Browse available units in our catalog of 800T Push Buttons.
800T-QTH2A
This pilot light has a contact configuration of 1 normally open (NO) and 1 normally closed (NC) contact. It is suitable for panel mounting and operates within NEMA 4/13 enclosure standards, indicating
This selector switch operates across three distinct positions and is engineered for durability, with an electrical design life rated at 1,000,000 cycles under maximum load. It meets NEMA ratings from
This push button features a green lens and is made from durable metal. The device is factory assembled and panel mountable, with a diameter of 30.5 mm. Designed with LED illumination, it ensures visib
This momentary push button operates with a thermal current rating of 10 A and is configured for electrical connections via screws. It accommodates input voltage for its illumination module ranging fro
This enclosure is made from die cast aluminum and has a hole diameter of 30.5 mm. It features two mounting holes and provides NEMA Type 4/13 protection, ensuring suitability for wet and dust-prone env
Designed to operate at 120 V AC with breaking capacities of 6 A, the 800T-XD1 contact block supports NEMA types 1, 4, 12, and 13. It is capable of withstanding a dielectric strength of 2,200 V and off
This single-unit station features a momentary action type, engaging with a push while providing 1 normally open and 1 normally closed contact. With a compact diameter of 30 mm, the 800T-NX114 has a ro
This toggle switch has a 30 mm mounting size and operates with a variety of wire sizes from 18 to 14 AWG. It includes a single normally open (NO) and a normally closed (NC) contact in positions one an
This push button station features a durable Type 4/13 enclosure rating, making it suitable for various environmental conditions. It is intended for surface or panel mounting and is constructed from me
This push-pull switch operates with a contact block rated for 10A and supports an illumination module input voltage of 120V AC. The hole diameter is measured at 30.5 mm, making it compatible with stan