Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's
warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Browse available units in our catalog of 802M Sealed Limit Switches.
802M-AY5
Working under IP67 protection, this limit switch provides excellent resistance to dust and water. It operates with a torque requirement of 0.34 Nm and supports two circuit connections. The maximum con
This limit switch features a contact configuration of 1 Normally-Open (NO) and 1 Normally-Closed (NC) contact with snap action for dependable operation. It has a side push solid rod actuator and a max
This limit switch operates efficiently within a temperature range of 0 to 80 degrees Celsius. It supports spring return and has a short trip design. The approximately 16-foot cable connection allows f
This limit switch can attain a maximum operating angle of 86 degrees, with only 15 degrees needed to engage contacts. The torque required for operation is rated at 0.56 Nm, and it features a spring re
This limit switch operates efficiently with two switch circuits and includes corrosion-resistant features. The body type is standard, and it functions effectively in both clockwise and counterclockwis
As part of the 802M Sealed Limit Switch series, the 802M-ATY5NF limit switch assembly is configurable with a 1.52-meter STO cable. It features four circuits and has a travel distance to reset contacts
This limit switch offers a spring return action and has an operating torque of 0.34 Nm. It features a factory-sealed construction for enhanced durability against environmental factors. The switch supp
With a maximum travel of up to 86 degrees, this limit switch operates with a torque rating of 0.34 N·m. The unit is equipped with a 5-pin mini-type receptacle for connections and requires a travel of
Designed for CW (clockwise) operation only, the 802M-A1Y5 provides reliable performance with a maximum contact travel of 15° to operate and 6° to reset. It operates under a rated AC voltage of 600 V a
This limit switch is equipped with a 5-pin mini connector (J1 wiring) and operates in both clockwise and counterclockwise directions. It can handle a maximum travel of 86° and requires a travel of at