F-4030-Q-H00AA

The Allen-Bradley F-4030-Q-H00AA 1398 Ultra F Series Medium Inertia Brushless Servo Motor is an AC brushless synchronous servo motor with a ferrite permanent magnet rotor, which is designed for use with the Allen-Bradley 1398 motion control system. This F-series servo motor is designed to be interchangeable with any H-Series servo motors, and it features a watertight connector, with an economically designed enclosure that is fitted for harsh industrial environments. The F-4030-Q-H00AA has 230 Volts AC operating voltage, with a base-rated base rotor speed of 4000 RPM, and it offers 0.063 Newton-meter maximum friction torque at 25 degrees Celsius. This servo motor has a rated moment inertia of 0.001 kilogram-meters square, and it has a maximum damping value of 0.06N-m/kRPM. The F-4030-Q-H00AA offers a winding constant of 0.54 Newton-meter per Ampere (N-m/A), with a 66V/kRPM voltage constant, and it has a rated phase-to-phase winding resistance of 2.2 Ohms at 25 degrees Celsius. This motor is designed for 8-pole wiring, and it has a rated thermal resistance of 0.63 Watts per degree Celsius. It has rated permissible radial load of 27 kilograms at 1000 RPM and 17.2 kilograms at 4000 RPM maximum rotor speed. It is used with the 1398 Ultra 100, Ultra 200, and Ultra Plus series of intelligent servo drives, and it provides a 3.5 Newton-meter continuous stall torque with these drives. The F-4030-Q-H00AA has a 0 to 250 Volts DC inbuilt thermostat which acts as a switch for 24 Volts DC of logic voltage, and this thermostat offers a maximum switching current of 5 Amps. It is designed with a standard 2000 Quadrature pulse motor mounted encoder, and it is suitable for machine tool/metal cutting, textile machinery, CAM replacements, and web and film applications. It comes with an IP65 standard environmental enclosure, with a 40-millimeter frame size, and it is designed to survive 2.5G peak vibration at 30 to 2000 Hertz. It has an operating temperature range of 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit) at 5 to 95% non-condensing relative humidity, and it has a storage temperature of -30 to 70 degrees Celsius (-25 to 158 degrees Fahrenheit). The F-4030-Q-H00AA has an average shipping weight of 11 kilograms and shipping dimensions of 194 x 127 x 102 millimeters.

The Allen-Bradley F-4030-Q-H00AA is an F-Series Servo Motor that is part of the 1398 Ultra series. This servo motor is essentially a brushless AC motor, installed with Ferrite magnets into its rotors for delivering nearly four (4) times higher inertia compared to the H-Series servo motors. The F-Series is interchangeable with the H-series however, due to inertia characteristics, the F-Series is more ideal.

The F-4030-Q-H00AA is a low inertia motor that is ideally used in Web and film processing, Machine tool/metal cutting, Textile machinery and CAM replacements. For a component motor of the Ultra Series, the F-4030-Q-H00AA provides higher inertia due to the installed Ferrite magnets, supports heavy-duty continuous operation, and comes with an environmentally rugged design.

The F-4030-Q-H00AA may be used with 1398-DDM-019 Ultra 100 Servo Drive or the 1398-DDM-020 Ultra 200 Servo Drive. With the Ultra 100 Servo Drive, the F-4030-Q-H00AA’s maximum operating speed can reach up to 3600 RPM with a continuous stall torque of 2.5 N-m or 31 lb-in and peak torque of 11.3 N-m or 100 lb-in. With the Ultra 200 Servo Drive, the F-4030-Q-H00AA’s maximum operating speed is 4000 RPM with a continuous stall torque of 3.5 N-m or 31 lb-in and peak torque of 9.0 N-m or 80 lb-in. The F-4030-Q-H00AA also supports the Ultra Plus series with catalog number 1398-PDM-20 and 1398-PDM-020.

The F-4030-Q-H00AA has a built-in thermostat with a rated voltage of 0 - 250 Volts DC or 50/60 Hertz AC; however, it is normally used as a switch for 24 Volt DC logic signal. It has a maximum switching current of 5 Amperes and contact resistance of less than 10 Ohms, maximum.