F-4030-Q-H00AN

The F-4030-Q-H00AN is an Allen-Bradley manufactured F-Series brushless servo motor. This is part of the rotary motion control platform. This servomotor supports the modern Kinetix Motion control as well as the legacy servo controller systems. This servo motor has medium inertia output rated .0010 kg/m2 or 0.009 lb-in-s2 which can be operated up to a maximum operating speed of 4000 RPM. It has a friction Torque rating of 0.63 N-m or 0.56 lb-in. with frame size 4030. The motor’s winding designator is Q and the integrated position feedback device is a 2000 Line count optical encoder. For installation, this servo motor is provided with NEMA 56C Flange. The F-4030-Q-H00AN is also provided with a Thermostat temperature sensing device with a rated voltage of 0 - 250 Volts DC or 50/60 Hz AC with a rated current of 2.5 Amperes at a Power Factor of 1.0 and 1.6 Amperes at a Power Factor of 0.6. The maximum switching current of this switch is 5 Amperes with a maximum contact resistance of fewer than 010 Ohms. The Thermostat’s contact is a normally closed (N.C.) contact with a dielectric constant of 1500 VAC RMS 50/60 Hz for 1 minute. The F-4030-Q-H00AN has Eight (8) Poles and phase to phase winding resistance of 2.24 ohms at 25 Degrees Celsius +/- 5 Degrees Celsius while the phase to phase inductance is 6.8 miliHenry. This servo motor has an operating temperature of 0 to 40°C (32 to 104°F), the storage temperature of -30 to 70°C (-25 to 158°F) with a relative humidity of 5-95%.

The F-4030-Q-H00AN is an AC brushless synchronous servo motor device. It is designed and manufactured by Allen-Bradley. It comes from the F series of servo motors. It is a device with medium inertia. The F-4030-Q-H00AN comes with Ke motor winding. These three-phase devices come with a standard optical encoder line count of 2000. It produces an output power of 2.5 Kilowatts. It has a standard braking option. The servo motor device comes inside a NEMA 56C flange. It also rated IP65, which means that it is protected from low water pressure and dust. The device is designed for 8-pole wiring and it has been rated with an operating temperature of 0 to 40 degrees Celsius. The maximum operating speed has been set at 4000 RPM. The F-4030-Q-H00AN runs with a .06 N-m/kprm damping and with a .063 N-m Friction torque. It comes with ferrite permanent magnet rotor and it can be used with the 1390 motion control system by Allen-Bradley. This F Series brushless servo motor is designed to be interchangeable with any H Series servo motors by Allen-Bradley. The installation of the F-4030-Q-H00AN should be done in an environment which is free from any electrical and mechanical hazards. These servo motor devices are widely used in textile machinery, machine tools, and CAM replacement.