F-4075-R-H04AA

The Allen-Bradley F-4075-R-H04AA brushless servo motor belongs to the F Series and it complies with the design specifications of the 4075 Frame product line. This servo motor has the ability to operate by using axial and radial loads in industrial environments. It needs to be attached to a control system and to a power system in order to perform each of its functions in a correct manner. The Allen-Bradley F-4075-R-H04AA brushless servo motor has an internal Thermostat with maximum switching current of 5 Amps and a rated voltage of 250 Volts DC. It also features a maximum speed of 3000 RPM and a thermal resistance of 0.40 degrees Celsius per Watt. The Allen-Bradley F-4075-R-H04AA brushless servo motor features 8 poles and a 24 Volts DC brake. It has a standard optical encoder line count of 2000 and a standard flange. The maximum operating temperature of the Allen-Bradley F-4075-R-H04AA brushless servo motor is 140 degrees Celsius at a specific ambient air temperature of 40 degrees Celsius maximum. A non-condensing humidity level of 5 to 95% is recommended. The standard radial load force rating of the Allen-Bradley F-4075-R-H04AA brushless servo motor is 42 kilograms at 500 RPM and 23 kilograms at 3000 RPM. The axial load force for the same servo motor is 44% of each radial load rating. It has been proven that noise may have a direct impact on the performance of the motor, and in order to prevent electrical noise, it is recommended to keep the wiring as short as possible, to keep the signal and power cables separate, to use shielded cables, and to ground both ends of the encoder cable. These recommendations will also help to prevent electromagnetic interference.

The F-4075-R-H04AA has a rated speed of 3000 revolutions per minute (RPM). Is equipped with a 24VDC brake and an optical encoder with line count of 2000 pulses and provided with a standard Flange.

The F-4075-R-H04AA is compatible for use with Ultra 2000 Series Digital drives specifically with 1398-DDM-030 and 1398-DDM-075 while compatible Ultra Plus Series including 1398-PDM-30 and 1398-PDM-50, 1398-PDM-75 Positioning Drive.

The moment of inertia rating of the F-4075-R-H04AA is 0.0032 kg-m2 or 0.029 lb-in.-s2, Friction Torque of 0.17 N-m or 1.5 b-in and damping of 0.15 N-m/kRPM or 1.3 lb-in./kRPM. The radial moad force rating of the F-4075-R-H04AA is 23.1 kg or 51 lbs. A 100% axial load rating is achieved when the motor has no radial load.