MPG-B010-031S22

The MPG-B010-031S22 servo motor is a servo motor manufactured by Allen-Bradley/Rockwell Automation as part of the Bulletin MPG Series and Type G product lines. It is an integrated gear servo motor and it has a voltage rating of 460 Volts AC as well as a frame size of 10. This Allen-Bradley motor comes without a brake, and it has a gear reduction rating of 31 to 1 and a single-turn high-resolution encoder for feedback. The storage temperature range of the MPG-B010-031S22 servo motor is -30 to 70 degrees Celsius and it should be stored and operate in a non-corrosive atmosphere. It has a relative humidity range of 9 to 95 percent without condensation, and it should be stored in a clean and dry location. The IP protection code of this servo motor by Allen-Bradley is IP64, and this means the motor is dust-tight and protected from splashing water.

The operating temperature range of the Allen-Bradley MPG-B010-031S22 servo motor and other units in the MPG Series is from 0 to 40 degrees Celsius. The vibration ratings for the MPG Series integrated gear motors include a storage shock rating of 20 G peak for the duration of 6 milliseconds and an operating vibration of 2.5 G peak with a frequency of 30 to 2000 Hertz. All the installations of motors like the MPG-B010-031S22 servo motor must be in compliance with the local regulations and all the equipment and the installation practices must promote electromagnetic safety and compatibility. These motors all come with a dowel pin hole that helps with the alignment of the motor output on the machine. When installing these units, it is essential to ensure that the cables are restrained and installed in a way that prevents irregular tension or cable connector flexing.