MPL-A430H-HJ72AA

The MPL-A430H-HJ72AA is a Servo motor that is part of the Low inertia output, MPL series from the Kinetix product family. This servo motor is an essential component for implementing rotary motion and positioning control. The MPL series, including the MPL-A430H-HJ72AA features high torque to size ration and built with high-energy rare earth magnets that contributes to the motor’s faster acceleration and efficient braking. The MPL-A430H-HJ72AA has an output power of 1.8 kiloWatts and rated speed of 3500 revolutions per minute (rpm). It has continuous stall Torque of 6.21 Nm (55 lb-in.) and peak stall torque of 19.8 Nm (175 lb-in.) while current ratings include 12.2 A (0-pk) continuous stall current and 45.0 A (0-pk) peak stall current. This motor has rotor inertia output of 0.00038 kg-m2 (0.0033 lb-in.-s2). The MPL-A430H-HJ72AA requires a servo drive to implement the desired motion sequence. It requires a single servo drive to operate however, there are a number of servo drives that may be used with the MPL-A430H-HJ72AA, all coming from the Kinetix product family. Specifically, compatible servo drives include Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, Kinetix 7000. The MPL carries certifications from different organizations such as UL, CSA standards and CE. All motors, including the MPL-A430H-HJ72AA are designed to operate at temperature range of 0 - 40º C (32 - 104º F) and comes with a minimum protection rating of IP50 which may be increased up to IP65 / IP66 with the use of the correct shaft seal and environmentally sealed cables.

The MPL-A430H-HJ72AA is a Servo Motor device. It is designed and manufactured by Allen Bradley. It comes from the MP series of low inertia motors. It has a 230 armature Voltage system and a rated speed of 3500 RPM and comes with a 3 Inches magnetic stack. The 115 mm frame comes with a 2000-line encoder. It comes inside a Keyed shaft enclosure and can be mounted using an IEC metric flange. No braking option comes with this variant of a servo motor. The MPL-A430H-HJ72AA comes with a SpeedTEC DIN Connector for connection purpose. The servo motor can be rotated with a maximum rotating angle of 180 Degrees. It is a Brushless AC Synchronous device. This module is a permanent magnet rotary servo motor and is widely used in material handling, packaging, and printing and at automated assembly plants. It comes with stainless steel shafts and fasteners and is widely used in industrial areas in performance motion systems. It comes with different certifications for health, environment, and safety like CE, CSA and UL. It is widely used in the packaging industry, electronics assembly, automotive and metal industry. During the installation of this motor, the environment should be kept clean; any other devices that dissipate heat should not be present in that area. In addition, there should be no electric discharge present. The MPL-A430H-HJ72AA has an advanced feedback system that provides running performance information and passes it to the control system.