MPL-B430P-MJ22AA

The Allen-Bradley MPL-B430P-MJ22AA is a Kinetix MP low inertia series servo motor. This servo motor is an active product that is used for implementing position and motion control of equipment and devices. The main difference of a servo motor such as the MPL-B430P-MJ22AA from Direct on-line (DOL) or Variable Frequency Drive (VFD) controlled motors is that the MPL-B430P-MJ22AA has an encoder that monitors and provides feedback to the position or degree of rotation of the servo motor, focusing on the range of motion and current position of the motor.

The MPL-B430P-MJ22AA is a 400V voltage class motor, with frame measurement of 115 mm. It also has a magnet stack installed which measure 76.2 mm or 3.0 inches. The maximum operating speed of the MPL-B430P-MJ22AA is 5000 revolutions per minute (rpm) and comes with an internal 1024 sin/cos resolution multi-turn, absolute encoder that is also capable of Hiperface protocol that is also known as Stegmann protocol.

This servo motor must be paired with any of the compatible Kinetix servo drives such as Kinetix 5500, Kinetix 5700, Kinetix 6200/6500, Kinetix 6000, Kinetix 300/350, Kinetix 2000, and Kinetix 7000. The Kinetix 5500 and 5700 when used, requires an additional kit such as 2198-H2DCK (series B or later) Hiperface-to-DSL feedback converter kit and 2198-K57CK-D15M universal feedback connector kit.

This servo motor also comes with FF Type mounting holes and a keyed shaft. A shaft seal, 24VDC holding brake may be added to meet the appropriate IP66 protection rating and achieve the dynamic braking characteristic.

This compact brushless synchronous motor is designed by Allen-Bradley to meet the demands of high-performance industrial systems. Typical applications for the servo motor include automotive, converting, electronic assembly, and packaging applications. A wide range of drives can be used with the MPL-B430P-MJ22AA servo motor, including the Kinetic 6000, Ultra 3000, Kinetix 5700, and the Kinetix 2000 drives. The MPL-B430P-MJ22AA servo motor is designed for 400 Volts AC input and it has a rated speed of 5000 RPM. The frame size of the motor is 115 millimeters and the magnet stack length is 76.2 millimeters (3 inches). The motor includes a 1024 sin/cos absolute multi-turn encoder which supports the Hiperface protocol. A shaft key is included, but a shaft seal is not included and it must be ordered separately if needed. The Allen-Bradley MPL-B430P-MJ22AA servo motor is not equipped with a brake. A 24 Volts DC brake is available as a braking option and it can be ordered separately. The mounting flange type for the servo motor is an IEC metric mounting flange with free mounting holes (type FF). The motor comes with standard factory options. The motor connects to the drive through a DIN connector which is 90 degrees rotatable. The approximate weight of the MPL-B430P-MJ22AA servo motor is 5.5 kilograms. The rated output power is 2.2 kilowatts. The continuous stall torque is 6.55 N-m while the peak stall torque is 19.8 N-m. The radial load force ratings are 106 kilograms at 500 RPM, 84 kilograms at 1000 RPM, 67 kilograms at 2000 RPM, 55 kilograms at 3500 RPM, and 49 kilograms at 5000 RPM.