Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPL Servo Motors MPL-B430P-SJ24AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPL-B430P-SJ24AA

|
Need a Specific Revision?

This Allen Bradley (AB) MPL Series servo motor is a 5000 rpm rated AC servo. Additionally, this smart servo has a shaft key installed on the servo to allow for connecting to this motor. Also, it features a single turn feedback and has circular bayonet(facing shaft) cable connections that come on top of this motor. This MPL Series premium servo comes with a braking feature built-in in case braking is required. This MPL Series AC servo uses 400 volt to operate.

Out of stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPL-B430P-SJ24AA

ManufacturerAllen Bradley
CategoryMotors
Product LineMPL Servo Motors
Part NumberMPL-B430P-SJ24AA
Weight15.00 lbs (6.80 kg)
SeriesPremium permanent magnet rotary servo motor
Series TypeLow-inertia
Voltage Class400 Volts
Frame Size115 millimeters
Magnetic Stack Length3 inches
Rated Speed5000 rpm
FeedbackSingle-turn high-resolution encoder
Shaft Key/SealShaft key/no shaft seal
ConnectorsCircular bayonet, facing shaft
Brake24 Volts DC brake
Mounting FlangeIEC metric
Factory Designated OptionsStandard
View as PDF
Request a Repair

Manufactured by Allen-Bradley, the MPL-B430P-SJ24AA servo motor is a low-inertia servo motor. The servo motor features a power voltage rating of 460 Volts AC and it comes with a 115 millimeters frame size. The MPL-B430P-SJ24AA servo motor features a single-turn high-resolution encoder and it comes with a bayonet facing the shaft. EMI (electromagnetic interference) causes poor performance in the servo motor. The poor performance is caused by the induction of stray signals. Separate the signal cables from the motor cables and the power wiring. Avoid routing the signal cables with the motor and the power wires or over the servo motor vent openings. The MPL-B430P-SJ24AA servo motor is 5000 revolutions per minute. The low-inertia servo motor has a 3.0-inch magnetic stack length. The MPL-B430P-SJ24AA servo motor is a 24 Volts DC brake and it comes with the IEC metric mounting flange and a standard factory designated option.

The Allen-Bradley low-inertia high-output MPL-B430P-SJ24AA servo motor uses an innovative design to minimize the motor size and ensure that high torque is delivered. The MPL-B430P-SJ24AA servo motor features an advanced design, helping the servo motor to meet the demanding requirements of high-performance applications. The MPL-B430P-SJ24AA servo motor features the smart motor technology with an onboard memory that helps it to retain the motor identity. The servo motor also features the RS-485 communication port for helping to link the unit automatically and reporting the identity to the system at the motor startup. This ensures that the Allen-Bradley servo motor has a reduced commissioning time. When installing the MPL-B430P-SJ24AA servo motor, it is necessary to ensure that optimal environmental conditions are met. Ensure that the motor is not enclosed unless there is forced air being blown across the motor to ensure sufficient cooling. If other heat producing devices are installed nearby, make sure that they are kept away from the motor. This ensures a longer life for the servo motor.

Revision Part #Also known as
MPL-B430P-SJ24AA Ser AMPL-B430P-SJ24AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.