Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPM Servo Motors MPM-B1152F-MJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPM-B1152F-MJ74AA

|
Need a Specific Revision?

The Allen-Bradley MPM-B1152F-MJ74AA servo motor has been designed and manufactured as part of the Allen-Bradley/Rockwell Automation MPM series of medium-inertia brushless servo motors. It is also part of the 400 Volts voltage class within the MPM series. The MPM-B1152F-MJ74AA servo motor comes with an optional 24 Volts DC rated holding brake, 2 internal magnet stacks, an IP 65/IP 67 rated enclosure, and an IEC metric mounting flange. It does not have a shaft seal, but installing an optional shaft seal will give it a greater degree of protection against particles and liquids. The MPM-B1152F-MJ74AA servo motor operates with feedback that is provided by a multi-turn encoder.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPM-B1152F-MJ74AA

ManufacturerAllen Bradley
Product TypeServo Motor
Product LineMPM Servo Motors
Part NumberMPM-B1152F-MJ74AA
Weight14.94 lbs (6.78 kg)
Series TypeMedium Inertia
Voltage400V
Frame Size115 mm
Magnet Stacks2
Base Speed3000 rpm
FeedbackMulti-turn High-resolution Encoder
EnclosureIP65/IP67
Mounting FlangeIEC Metric
Brake24V DC Brake
View as PDF
Request a Repair

The MPM-B1152F-MJ74AA Bulletin MPM is a Medium-Inertia Servo Motors unit. It runs on 460 Volts and 3000 RPM. Features Multi-turn High-resolution Encoder for absolute feedback. Also has a SpeedTEC DIN Connector, Keyed Shaft Extension, Right Angle, 180 degrees Rotatable with Quick Connect. Has 24 Volts DC Brake, Type FF Free Mounting Holes, and IEC Metric. The MPM-B1152F-MJ74AA is well-built and has a Multi-Turn with Absolute Feedback Encoder. The 24 Volts of the holding brake provide a release response time close to 50 milliseconds. The Allen-Bradley MPM-B1152F-MJ74AA is a brushless MP-Series Medium Inertia Servo Motor. It comes with a 460 Volts which falls into the 400 Volt voltage class, with a base speed of 3000 Rotations Per Minute and 5200 at maximum. At the base speed, MPM-B1152F-MJ74AA operates with either radial or axial shaft load weighing 58 kilograms (128 pounds).

The MPM-B1152F-MJ74AA motor weighs about 5.2 kilograms (11.4 pounds). It features rotor inertia of 0.00681 pounds per inch/second squared. The motor has a rating of 1.4 kilowatts output, at the speed of 4000 RPM. Allen Bradley’s MPM-B1152F-MJ74AA comes with a continuous stall torque of approximately 42 pounds on an inch or 4.74 N-m. Has a peak stall torque of about 119 pounds on an inch or 13.5 N-m. The BCD (Bolt Circle Diameter) of this module measures 115 millimeters and has two magnet stacks as well as a circular DIN connector, rotatable right angle 180 degrees. Features a mounting flange with an IEC metric fit with free mounting holes.

Revision Part #Also known as
MPM-B1152F-MJ74AA Ser AMPM-B1152F-MJ74AA/A, Series A, Rev A
Don't see your particular revision? Contact us now.