MPM-B1153E-MJ74AA

The MPM-B1153E-MJ74AA is a permanent magnet rotary servo motor that belongs to the MP Series and it is manufactured and designed by Allen-Bradley. Motors from this series combine the features of MP Series of low inertia motors with a rotor. The Allen-Bradley MPM-B1153E-MJ74AA permanent magnet rotary servo motor operates at a voltage of 400 Volts, with middle inertia and with a base speed of 2250 RPM. The Allen-Bradley MPM-B1153E-MJ74AA permanent magnet rotary servo motor includes a mounting pilot that helps align the motor on the machine, it is recommended to use hardened steel fasteners. A clearance is required in order to allow the proper functioning of the heatsink enabling the motor to operate at a preferred temperature range of 0 to 40 degrees Celsius.

In order to prevent electrical noise, the motor must be isolated and the signal and power cables must be separated. It is recommended to ground all the equipment by using a single-point parallel ground system. The Allen-Bradley MPM-B1153E-MJ74AA permanent magnet rotary servo motor is surrounded and protected with an IP 65/67 enclosure. This enclosure protects the main parts of the motor and it impedes the entrance of solid particles and it can also withstand temporary immersion. If the application requires that the motor supports water jets, a shaft seal option is available. In order to extend the life of the Allen-Bradley MPM-B1153E-MJ74AA permanent magnet rotary servo motor, users must check regularly the motor looking for seals of damage or wear. Shaft seals must be checked every three months to avoid contamination from external fluids.