MPM-B1153F-MJ74AA

The MPM-B1153F-MJ74AA is a Medium-inertia servo motor that is manufactured and designed by Allen-Bradley and it belongs to the MP Series. This servomotor is appropriate for applications with high-inertia loads. The Allen-Bradley MPM-B1153F-MJ74AA operates with a voltage of 400 Volts and a base speed of 3000 RPM. This motor includes a multi-turn high-resolution encoder and a 24 Volts DC brake. It can change up to 180 degrees of position. The MPM-B1153F-MJ74AA motor has an IP 65/67 enclosure that prevents the unit from the entrance of foreign particles such as dirt, dust, or drops of water, and it can be immersed temporarily. This enclosure allows the motor to withstand an operating temperature of 0 to 40 degrees Celsius, a relative humidity of 5 to 95% and it is recommended to be installed in a noncorrosive atmosphere. In order to offer a more complete protection, a shaft seal can be installed.

In order to maintain the recommended temperature range, it is recommended to leave clearances between the motor and other equipment in order to allow the airflow through the heatsink. Prior to the installation of the Allen-Bradley MPM-B1153F-MJ74AA, the motor must be grounded in a parallel grounding system, besides this, it is recommended to use shielded cables and to keep the signal and power cables separated. Other ways to reduce electromagnetic interference is to isolate power transformers or, in any case, install filters on all AC input power lines and to keep the cable length as short as possible.