Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
Allen Bradley MPM Servo Motors MPM-B1652F-SJ74AA

Product image is representative; revision or series may vary. Contact us to request a specific version.

MPM-B1652F-SJ74AA

|
Need a Specific Revision?

The Allen-Bradley MPM-B1652F-SJ74AA Servo Motor is a medium-inertia servo motor. It has a supply voltage of 460 Volts AC and frame size of 165 millimeters or 6.5 inches.

Call for an immediate quote
2 Year DO Supply Warranty
Available
Ships from Raleigh, NC
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Technical specifications for MPM-B1652F-SJ74AA

ManufacturerAllen Bradley
Product TypeBulletin MPM - Medium-Inertia Servo Motors Product
Product LineMPM Servo Motors
Part NumberMPM-B1652F-SJ74AA
UPC884951113800
Weight51.13 lbs (23.19 kg)
Supply Voltage460 Volts AC
Frame Size MPM165 mm (6.50 in.)
Magnet Stacks MPM2 stacks
Revolutions per minute3000 RPM
FeedbackSingle-turn High-resolution Encoder
EnclosureKeyed Shaft Extension
ConnectorsSpeedTEC DIN Connector, Right Angle, 180° Rotatable (Quick Connect)
Brake Option24 V DC Brake
International Protection (IP) RatingIP67 and IP65
Operating Temperature0 to 40 degrees Celsius (32 to 104 degrees F)
Storage Temperature-30 to 70 degrees Celsius
Storage Relative Humidity5 to 95 percent noncondensing
Request a Repair

The Allen-Bradley MPM-B1652F-SJ74AA Medium-Inertia Servo Motor has a supply voltage rating of 460 Volts AC and its frame size is 6.5 inches. The servo motor features 2 magnet stacks, a maximum speed of 3000 revolutions per minute, and a 24 Volts DC brake option. It has the feedback of a single-turn high-resolution encoder and a keyed shaft extension enclosure. The connectors for this medium-inertia servo motor are the SpeedTEC DIN Connectors that are 180 degrees rotatable to enable flexibility and quick connections. To prevent electrical noise or Electromagnetic interference (EMI), it is recommended to ensure that all the input power lines have filters. Also, separate both power the wiring and the motor cabling from the power transformers. Ground the whole motor with a single-point parallel-ground system that applies large straps or ground bus bars. Proper maintenance can prolong the life of the Allen-Bradley MPM-B1652F-SJ74AA Medium-Inertia Servo Motor.

The Allen-Bradley MPM-B1652F-SJ74AA Medium-Inertia Servo Motor has a storage temperature range from -30 to 70 degrees Celsius (-22 to 158 degrees Fahrenheit), a storage humidity range between 5 and 95% (noncondensing), and a noncorrosive storage atmosphere. It has an operating temperature range from 0 to 40 degrees Celsius (32 to 104 degrees Fahrenheit). The Allen-Bradley MPM-B1652F-SJ74AA Medium-Inertia Servo Motor has an optional shaft seal installed that has International Protection (IP) ratings of IP 67 (dust-tight and suitable for one-meter immersion maximum) and IP 65 (dust-tight and immune to water jets). To prevent motor shaft rotation, the users should reduce the servo drive speed to 0 revolutions per minute, confirm that the motor is at 0 revolutions per minute, employ the brake, and then disable the drive.